Baja Designs Lighting

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Joined
Sep 22, 2022
Posts
4
Reaction score
4
Location
Chicago
Hello,
Just wanted let you all know that I just installed some Baja design lights on a raptor after the owner had addictive desert design front and rear bumpers installed and add’s fmic. He opted for the ONX6+ 20” front light bar which was rated at 8.4 amps per 10” section. I was a little nervous because the 18 raptor only has 15 amp aux circuits. Well I did some bench testing on the light and couldn’t get it to draw more than 10.8 amps. So Baja has about a 55-60% safety margin built into their rating. You may even be able to run up to a 30” bar on the stock aux switch. I don’t have this available to test.

So he has the 20” front light bar on aux1 on an add pro v1 front bumper and 2 s8 wired to aux2 and 2 squadron sport wired straight into reverse circuit on the add honey badger rear bumper. Just wanted to let you guys know the rating I found in case you were nervous or adding unnecessary relays being tripped by switches.
 
Top