GEN 1 Can't shift out of Park, Starts/runs fine. Dash works but everything else electrical is off.

I have the HF ZR13m but didn't see any codes. I don't think it reads all the modules.

Adam Miller said:

I have the HF ZR13m but didn't see any codes. I don't think it reads all the modules.

Click to expand...

Definitely download ForScan and pull codes before going any further. No point in throwing parts when ForScan is free, just need an cable like OBD Link.

Atleast for the shifting part, did you double check the 2 harness clips inside the passenger kick panel next to the center console? If those aren't plugged in, it won't let you shift

FordTechOne said:

Definitely download ForScan and pull codes before going any further. No point in throwing parts when ForScan is free, just need an cable like OBD Link.

Click to expand...

Downloaded ForScan. The cable just arrived, so I'll scan it tonight.

The gearshift assembly should arrive at the local dealer tomorrow. I didn't order the BCM yet, but another Chicago dealer has one in stock, if necessary. Where does that Parkin Interlock Solenoid go though? I can't find any YouTube videos for comparable years with the console shifter.

Big Papa Gecko said:

Atleast for the shifting part, did you double check the 2 harness clips inside the passenger kick panel next to the center console? If those aren't plugged in, it won't let you shift

Click to expand...

I have not checked those. I haven't been in there doing anything else, but I'll check anyway.


On a complete tangent, but am I able to disable the TPMS warnings through ForScan? When I bought the beadlocks and new tires last year apparently I bought and installed the wrong sensors.

Adam Miller said:

Downloaded ForScan. The cable just arrived, so I'll scan it tonight.

The gearshift assembly should arrive at the local dealer tomorrow. I didn't order the BCM yet, but another Chicago dealer has one in stock, if necessary. Where does that Parkin Interlock Solenoid go though? I can't find any YouTube videos for comparable years with the console shifter.

Click to expand...

have you checked fuse 45? The solenoid should be directly under the plate that shows PRND passenger side i believe

Adam Miller said:

Downloaded ForScan. The cable just arrived, so I'll scan it tonight.

The gearshift assembly should arrive at the local dealer tomorrow. I didn't order the BCM yet, but another Chicago dealer has one in stock, if necessary. Where does that Parkin Interlock Solenoid go though? I can't find any YouTube videos for comparable years with the console shifter.

Click to expand...

2010 models still used a Smart Junction Box (SJB); not a BCM. When the brake pedal is pressed, the brake switch contacts close and send 12V from fuse F46 in the BJB over circuit CCB08 to the SJB. When the SJB sees 12V, it uses a Field Effect Transistor (powered by Fuse F5 in the SJB) to send 12V to the brake shift interlock solenoid and activate it to release the shifter from park.

I checked fuse 45...but looks like I need to check 46.

And I forgot to bring my laptop home from work tonight--doh!

Fuse 46 was fine as well.

Can't get FORScan to connect. Tried both positions on the OBD2, plugging/unplugging, closing and restarting forscan, etc.

This is the OBD2 I bought. https://www.amazon.com/dp/B094QHZ77F/?tag=fordraptorforum-20

There is no driver being installed...should there be?

Found an old bluetooth ODB2 that seems like it is going to work--although it isn't switchable. the other one was a piece of junk.