What did you do to your Raptor today? (Gen2)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OICNW-Rob

FRF Supporting Member
Supporting Member
Joined
Jan 3, 2020
Posts
49
Reaction score
60
Location
Bend, Oregon
got the ol girl back from the wrap shop today. it's a burgundy/black iridescent sparkly color with silver pressed carbon on the bottom following the body lines.

EbrYx49.jpg
CuuabKf.jpg
A1kVt2e.jpg

I also ordered a built ecoboost. it will be good for about 1050hp to the wheels ( coupled with some "soon to be released" garrett turbos that are due in April).

Teaser:

dWfrPz9.jpg

forged internals, some head work and a few bits being borrowed from the Ford GT parts bin.

Monday, I'm off to Texas Motorworks for new wheels/tires and a few other odds and ends.

I'll be in Baja Friday morning with ExO, bright and early. really stoked to get back out in the dirt with my homies.


Badass truck! What A-Pillar mounts are those that allow for the second pair of lights?
 

Russ103

Full Access Member
Joined
May 13, 2019
Posts
829
Reaction score
1,172
Location
MD
Finally got my Cobb FMIC installed along with a Goosetuned stage 2 (with TCM). Have to do another revision, but wow!! The truck is a completely different animal!

Took it out to see just how badly I would lose to my wife’s new 523hp grocery getter (with my friend driving the BMW, me the Raptor) and was pleasantly shocked at the fact that it was a relatively close 0-100mph run. Had to put the truck in 4A as traction in 2WD from a stop sucks.

Can’t wait to finish the tuning.

160C2D7B-8984-49CB-B500-0E09AB0BAEEE.jpeg

D045BFDA-AA08-430B-BB55-E3105FCC3EE2.jpeg

9BFCD968-CCDF-43A3-918E-8B7C482C4AD5.jpeg

93E051B1-5DAB-499D-9B27-BFAEA33A64ED.jpeg
 

Sloracer

Member
Joined
Feb 1, 2021
Posts
29
Reaction score
51
Location
Bay Area
Completed the ORA Triple Bezel install with Baja Design Squadron Pros, SAEs and S1s with the ORA amber covers. Stoked on the color match with the amber... would love to get them wired up to come on with the other marker lights but that's likely beyond my skill set. For now using upfitter switches 2-4 and saving switch 1 for when I get inspired to do a light bar. Looking at reverse lights next!

Thanks @dblack for the washer/spacer info - took a ton of the guess work out and was spot on where the lights needed to be!

Although, I keep thinking all these lights will be obsolete if I go with the ADD Pro bolt on bumper! It just looks too perfect on the Raptor to not do at some point...
Fog Lights ON.jpg Fog Lights.jpg
 

Traffic22

Full Access Member
Joined
May 3, 2020
Posts
416
Reaction score
334
Location
SF Bay Area
Bought some backup lights from @ReyLorenzo. (On a side note, good transaction. Fast shipping, great packaging, good communication and the lights are in nice shape.)

After getting the dual use wiring harness for @4x4TruckLEDs.com got them installed today.

Man these things are bright. Pretty’s easy instal. Only dicey part was removing the tail light. (Twice, because the wire tap didn’t cut the reverse wire the first time.) Managed to get it done without breaking any tabs or clips.

5531c1a30326aadce7b19dbe899d2c12.jpg


Sent from my iPad using Tapatalk
 

dblack

Full Access Member
Joined
Sep 15, 2019
Posts
406
Reaction score
304
Location
Alabama
Completed the ORA Triple Bezel install with Baja Design Squadron Pros, SAEs and S1s with the ORA amber covers. Stoked on the color match with the amber... would love to get them wired up to come on with the other marker lights but that's likely beyond my skill set. For now using upfitter switches 2-4 and saving switch 1 for when I get inspired to do a light bar. Looking at reverse lights next!

Thanks @dblack for the washer/spacer info - took a ton of the guess work out and was spot on where the lights needed to be!

Although, I keep thinking all these lights will be obsolete if I go with the ADD Pro bolt on bumper! It just looks too perfect on the Raptor to not do at some point...
View attachment 163274 View attachment 163275
Glad the spacer info worked out for you. The setup looks great!
 
Top