Gen 1 (2012) making odd "clatter/rattle over rough pavement (video)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

MFNG

Full Access Member
Joined
Jun 28, 2019
Posts
759
Reaction score
1,219
Location
Illinois
Another thing to think about if you change your own oil is the Skid plate bolts strip out easy if over torqued - again know it because I did it.

Caused a similar rattle.
 
OP
OP
William S Perry
Joined
Dec 21, 2020
Posts
23
Reaction score
27
Location
Tucson, AZ
Another thing to think about if you change your own oil is the Skid plate bolts strip out easy if over torqued - again know it because I did it.

Caused a similar rattle.

That was one of my first thoughts as well, and the trap door is missing one bolt. It seems tight though banging on it. I'll check the other bolts
 

03Cobraraptor

Full Access Member
Joined
Oct 7, 2015
Posts
356
Reaction score
198
My guess Sounds like the skid plate banging around...?

when I change my oil I always remove the skid plate and when I reattach it it sounds like that until everything is tightened up
 

coachhomer

Full Access Member
Joined
Aug 19, 2013
Posts
258
Reaction score
100
Sounds like you have a couple of rattles. One closer to the mic and one farther. Is the closer one your keys? The more prominent rattle sounds similar to what I had in my 2012. Ended up being the front shock. Replaced with the new Fox 3.0 and my rattle was gone.

C


Sent from my iPhone using Tapatalk
 
Top