Pics of motorhome and Raptor

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

johndjmix

Full Access Member
Joined
May 15, 2014
Posts
357
Reaction score
173
Very cool don! I don’t see why that’s cosmetic only? Looks like it will work perfectly.

—john


Sent from my iPhone using Tapatalk
 

jzweedyk

FRF Addict
Joined
Jun 30, 2018
Posts
2,315
Reaction score
4,499
Location
Moab/Winter Travel/Summer Travel
@kpecks @jzweedyk Do the front end of your trucks not get nailed with rocks and debris kicking up from your motorhomes?
After reading a bunch of stuff on MH forums, I removed my back "rock shield" (still have mud flaps on MH) and it seems to be fine. I also had the first few inches of the hood wrapped. So far, so good.
 

Oxmach

Member
Joined
Nov 16, 2017
Posts
1
Reaction score
0
I’m adding the AF1 to my 2018, and really like the idea of putting the air, electrical and breakaway behind the license plate.
Don, GizmoVance, can you describe or post pics on how your connections are mounted behind the grill? It looks like Don has fabricated a plate and mounted it to the grill. Not too sure what the notches in the top are for or how the breakaway is mounted. Gizmo, I can’t see any plate, how are yours attached?
Thanks gents.
Greg
 

johndjmix

Full Access Member
Joined
May 15, 2014
Posts
357
Reaction score
173
Class A’s are great if your spending a lot of time in one place. The inside has tons of room. But if your traveling a lot, doing weekends, etc a super C works much better.

Personally I’ll never get another class A. Truck based RV’s only. Working on class a’s is a PITA. Mine is based on a Freightliner M2. All truck parts for the chassis. Can easily get to all engine parts.

Here’s my Dynamax DX3. Complete with buck stop bumper and 16K winch.

3c2bc84a74cc6ee46f9be9e5216b0184.jpg

—john



Sent from my iPhone using Tapatalk
 
Top