Because the Fox's dont use rubber bushings for the mounting points, you're going to feel a bit more from the front end. Not saying your Fox's aren't an issue to tho...
Just pulled my new fox 3.0s because of a clunk I noticed after install. Really notice it when going over a speed bump quickly, like it was topping out. Turns out both shocks were low on oil from Fox and on the passenger side, the little cross pin that holds the DSC adjuster in place had fallen out on install, so it wasn't doing jack and if I'd over loosened them, it would have just come right out. Pic here shows it installed properly before reinstall, but it was floating around inside when we took it apart. Anyway, put it back together, clunk was still there. Lower ball joints look to have a good bit of play and the sway bar end links seem pretty roached, as well as the UCA bushings. Guess I have some parts to replace...
