GEN 2 FMIC help

Spowers723 · Jan 14, 2021

Hey guys bought a 2020 raptor back in April about to order Goosetuned stage 2 but i know I need to upgrade inter cooler first. Looking for recommendations from those of you already rolling GT stage 2. Thanks in advance!

Sent from my iPhone using Tapatalk

xrocket21 · Jan 14, 2021

stock location is cheaper and easier, relocated is bigger and stronger but more money and may cause overheating in extreme conditions. A stock location could possibly slip by warranty work.

Frame cut bumpers require a relocated IC.

I run a shelby branded whipple in the stock location and Im happy with it, and it keeps the stock fans.

Most stock locations are roughly the same.

I also enjoy a turbosmart BOV.

The wagner is a combo of the two, possibly the best and worst of both worlds.

What are your goals?

TerribleONE · Jan 14, 2021

I am running SVCs FMIC and a stage 2ACN tune from goose. Super happy with it! My truck pulls HARD on my buddies stock Raptor.

Spowers723 · Jan 14, 2021

xrocket21 said:
stock location is cheaper and easier, relocated is bigger and stronger but more money and may cause overheating in extreme conditions. A stock location could possibly slip by warranty work.

Frame cut bumpers require a relocated IC.

I run a shelby branded whipple in the stock location and Im happy with it, and it keeps the stock fans.

Most stock locations are roughly the same.

I also enjoy a turbosmart BOV.

The wagner is a combo of the two, possibly the best and worst of both worlds.

What are your goals?

Really just more power for powers sake lol. I don’t want to go overboard but I don’t want any cheap stuff either. From reading this forum seems like best move is tune combined with upgraded IC. I would leave it in stock location

Sent from my iPhone using Tapatalk

CVF-Jason · Jan 14, 2021

Give us a look while you shop around and hit me up for a forum discount code if you're interested!

Here's a forum post that breaks everything down:

https://www.fordraptorforum.com/threads/cvf-titan-intercooler-installation-and-review.70492/page-28

Here's a direct link to some data on the site:

https://www.cvfab.com/collections/t...ercooler-2015-f-150-raptor-2-7l-3-5l-ecoboost

xrocket21 · Jan 14, 2021

CVF-Jason said:
Give us a look while you shop around and hit me up for a forum discount code if you're interested!

Here's a forum post that breaks everything down:

https://www.fordraptorforum.com/threads/cvf-titan-intercooler-installation-and-review.70492/page-28

Here's a direct link to some data on the site:

https://www.cvfab.com/collections/t...ercooler-2015-f-150-raptor-2-7l-3-5l-ecoboost

Hell yeah

Always a very supportive vendor!!!!!

Zeusmotorworks · Jan 14, 2021

Went the CVF route after looking at many... seems to be the best bang for the buck in a stock location (not "cheap" as in quality though). However, unlike other platforms there are no back to back comparisons between the various offerings that I'm aware of. So don't expect a definitive answer if you are looking at "numbers". And, unless your talking same vehicle same day it's not apples to apples anyway.

ddubdb3 · Jan 15, 2021

I went with the ADD front mount. If you have mechanical ability it’s not a hard install. Plus walking out to your truck seeing that FMIC peeking behind the grille always gives you that “oohweee!!” feeling! My main selling point on this Intercooler was that it’s carb compliant as we all know Cali has the best automotive laws!

Sent from my iPhone using Tapatalk

Raptorrunner2019 · Jan 15, 2021

I went with stock location. If you are simply going to use goose stage 2 and not go crazy on other mods, or are not going with bumper that requires FMIC, I would stay with factory location. You will not have any appreciable performance gains by going FMIC I would think. Intercooler are for preserving power and I think the factory mount CVF that I have does that very well. I don’t think other Intercoolers will make temps any better, but almost any intercooler is a huge boost over factory.

OEMPlus Raptor · Jan 15, 2021

I'm still kind of new to this stuff, but what is FMIC and CVF. I may upgrade my intercooler later, but I'm not sure what all this means. I already have a Cobb Accessport with a Stage 1 Goosetune. If I did want to upgrade intercooler I would want to keep it in the stock location since I don't plan on doing aftermarket bumpers. Is it a worthwhile upgrade or only if you get something big like the ADD or Cobb Intercooler?

GEN 2 FMIC help

Spowers723

Member

xrocket21

FRF Addict

TerribleONE

Full Access Member

Spowers723

Member

CVF-Jason

Full Access Member

xrocket21

FRF Addict

Zeusmotorworks

Semi-retired, now just a happy grumpy old man!

ddubdb3

Member

Raptorrunner2019

Full Access Member

OEMPlus Raptor

OEM preferred....

Similar threads

Staff online

Members online

Forum statistics

Latest posts