2020 Raptor Oil Catch Can

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

KAJRIP

Full Access Member
Joined
May 5, 2017
Posts
98
Reaction score
159
Location
NEPA
I removed the UPR setup from my ‘17 and installed on my ‘20 with no issues.

The turbo inlet tube is different between the two of them though.

Not a dual can system like the OP asked about but it works great.
 

sixshooter_45

2019 Ruby Red Metallic SC, 3.5 L Twin Turbos.
Joined
Jun 17, 2012
Posts
1,558
Reaction score
844
Location
Arnold
Here's mine after approximately 3, 772


20200219_174911.jpg

It's a 16.9 once water bottle so I'm guessing approximately 6 ounces so about 8 ounces per 5,000 miles or oil change. It was shook up prior to taking picture.

This is what I don't want in my intake tubes, throttle body, IC, etc.
 

K223

FRF Addict
Joined
Sep 15, 2019
Posts
5,178
Reaction score
3,444
Location
Florida
That’s some ugly looking milkshake! Must be a lot of moisture that gets into the system as well.
 

Ricks_y

Member
Joined
Jan 21, 2016
Posts
45
Reaction score
11
just bought the Mishimoto 2017+ Ford F-150 3.5L EcoBoost Baffled Oil Catch Can Kit - MMBCC-F35T-17SBE- for my gen 2 2020.

going to install this weekend.

 

JefferyGT

Full Access Member
Joined
Dec 21, 2018
Posts
766
Reaction score
730
Location
Vantucky
Can JLT cans be used on driver side?

The passenger side definitely does a great job catching that oil before it goes into intake.
 

Ricks_y

Member
Joined
Jan 21, 2016
Posts
45
Reaction score
11
Mishimoto needs to update the video of the install.

i couldnt take apart the sensor hose, only 1 side.
customer service told me i might run into problems with the fittings of the hose's.
i managed to rig the hose's till mishimoto sends me the correct ones.

catch.jpg
 
Top