OJ's Audio Update

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
H

havinnoj

Active Member
Joined
Mar 20, 2016
Posts
62
Reaction score
28
For sub, I was unsure where I’ll end up. So I purchased a JL CS112TG-TW3 on a Black Friday deal so the box cost $40 more - good way to try it out and see it a single 12 will be adequate. Planning to have MTI build a box when I decide.

This box does sound nice and wedge it fits under the seat pretty well.

A667C463-F3E2-4614-B001-17714369BA1E.jpeg

F6621867-A020-4630-982B-82DD760EF32C.jpeg

0FDA8418-AE36-47CA-9B7D-C79F2CAEE10C.jpeg
 

The Car Stereo Company

aka grumpy car stereo guy
Supporting Member
Joined
Jul 8, 2012
Posts
31,595
Reaction score
21,461
Location
here, on frf
you can plug the zen module into your computer and get more volume through the optical. also, be careful if someone sits on that seat. the speaker will hit the bottom of the seat. also will crush the grill if you have one.
 
OP
OP
H

havinnoj

Active Member
Joined
Mar 20, 2016
Posts
62
Reaction score
28
you can plug the zen module into your computer and get more volume through the optical. also, be careful if someone sits on that seat. the speaker will hit the bottom of the seat. also will crush the grill if you have one.

Thanks yeah that’s the worry, it’ll get swapped out for a downfiring box.

As far as Nav TV / optical goes, the “Global Level” is currently set to 0dBFS, think that’s the max. Besides phone gain and chime level, not much else to adjust there unless I’m missing something.
 

RPsG2Rap

FRF Supporting Member
Supporting Member
Joined
Nov 18, 2020
Posts
10
Reaction score
9
Location
California
Great setup - I just added a simple PowerWedge+™ 10" powered subwoofer to my 2017 stock Sony system. The problem I ran into and maybe you know how to avoid was when the auto stop/start shut down the engine at a red light or similar the sub would also shutdown due to the power supply being altered. Any idea how to work around this besides disabling start stop would be welcomed!
 
Top