RPG Traction Bars and RPG Deaver +6 HD

Deleted member 17706 · Dec 4, 2020

Did you cut out a rear fender liner for the rear shocks?

BIGDJE · Dec 7, 2020

FGHT ON said:
what are you doing to raise the front up now that you added another 2 in the rear? Spindles alone going to net you that?

New fronts are coil overs just turn them to raise to equal back perfect level

Sent from my SM-G975U using Tapatalk

MAMiller44 · Dec 7, 2020

Mmmmm gator colors, I like.

BIGDJE · Dec 7, 2020

SVTFordRaptor said:
Did you cut out a rear fender liner for the rear shocks?

Yes had to trim them for bypass and expose shock

Sent from my SM-G975U using Tapatalk

FGHT ON · Dec 7, 2020

BIGDJE said:
New fronts are coil overs just turn them to raise to equal back perfect level

Sent from my SM-G975U using Tapatalk

Have any pictures of the front setup yet? I thought I read you could get up to an extra inch w coil overs, not 3.

I have +3 in the rear but I still don’t have the slight rake I was looking for so removed my spare for the time being. I was going to order +4 so I could put back the spare when I upgrade to the 3.0s, but would love to get even an extra few more inches and go to 37.

BIGDJE · Dec 7, 2020

FGHT ON said:
Have any pictures of the front setup yet? I thought I read you could get up to an extra inch w coil overs, not 3.

I have +3 in the rear but I still don’t have the slight rake I was looking for so removed my spare for the time being. I was going to order +4 so I could put back the spare when I upgrade to the 3.0s, but would love to get even an extra few more inches and go to 37.

Front is not done yet the coils are at paint they come black i painted them blue. I need 2 inches higher in front which won't be a problem with coil overs. Rpg shop truck has same set up with 37s.

Sent from my SM-G975U using Tapatalk

BIGDJE · Dec 10, 2020

Fronts went on today only shocks to level front and back. Drive 2200 miles to south Carolina monday for 2 weeks. Rest will get installed 1st week of jan and paint springs blue. Along with turbos upgrade. Others then 37s truck will finally be done bleeding me dry of money lol I don't even want to post how much I spent to date.

Sent from my SM-G975U using Tapatalk

BIGDJE · Dec 11, 2020

I measured ground to bottom of wheel arch today its 45 inches have about 500lbs on bed with cap, tire and custom RPG tire cage with 3 ton jack impact gun and fire extinguisher and had full tank of fuel

MAMiller44 · Dec 11, 2020

BIGDJE said:
I measured ground to bottom of wheel arch today its 45 inches have about 500lbs on bed with cap, tire and custom RPG tire cage with 3 ton jack impact gun and fire extinguisher and had full tank of fuel

View attachment 157773

Tasteful LEDs. I’m a big proponent of use all the LEDs you want as long as they’re done tastefully lol

BIGDJE · Dec 30, 2020

Front shocks went on before I drove 5K miles round trip to front to back was level. Was off a little bit but whole front has to come back off next week so was close enough for the drive. The coils came back from powder coat now blue. I had front and rear shocks set to soft and truck rode like butter whole trip. Love the new set up.

RPG Traction Bars and RPG Deaver +6 HD

Deleted member 17706

Guest

BIGDJE

Full Access Member

MAMiller44

Full Access Member

BIGDJE

Full Access Member

FGHT ON

Full Access Member

BIGDJE

Full Access Member

BIGDJE

Full Access Member

BIGDJE

Full Access Member

MAMiller44

Full Access Member

BIGDJE

Full Access Member

Similar threads

Staff online

Members online

Forum statistics

Latest posts