GEN 2 Unofficial Official Rays Wheels Thread!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
bvita

bvita

Full Access Member
Joined
Jul 14, 2019
Posts
159
Reaction score
197
Location
SoCal
appreciate it my brother! ugh this is gonna suck lol, i'll have to eyeball it when i get the wheels and tires on the truck, going to try and keep it clean and minimal as much as possible. going to be second to you in finishing the jdm wheel trifecta. i highly doubt i'll be switching wheels after the TEs

Trimming the liner and the fender flare corner was easy, getting into the pinch weld would be a day project though.

I *drove* home on the 37's prior to throwing in the perch collar. It was an interesting 60 mile trip from the shop to home. lol.

What finish did you go with?
 
OP
OP
bvita

bvita

Full Access Member
Joined
Jul 14, 2019
Posts
159
Reaction score
197
Location
SoCal
Man I wish those were available it 17"

Rays does not plan on offering a 17” for the Raptor. The Te37xt (following the now discontinued Te37x) are a step lip design in which the face it self is smaller, anything smaller or tighter will not fit or clear components.
 

Krazykorean

Full Access Member
Joined
Jan 3, 2017
Posts
144
Reaction score
50
Location
Mesa, AZ
Are you guys running the OEM tpms? If so I'm assuming you dont use the Rays valve stems that come with the Volks.
 
OP
OP
bvita

bvita

Full Access Member
Joined
Jul 14, 2019
Posts
159
Reaction score
197
Location
SoCal
Are you guys running the OEM tpms? If so I'm assuming you dont use the Rays valve stems that come with the Volks.

I didnt install the tpms sensor on my XT’s. Just using the Rays stem (personal preference of mine to use the rays stem)

On my gramlights, I used the complete oem valve core + sensor on the wheel. The rays valve stem does not accept the tpms sensor.

edit: TPMS / Rubber stem do fit the Te37xt.
 
Last edited:

Krazykorean

Full Access Member
Joined
Jan 3, 2017
Posts
144
Reaction score
50
Location
Mesa, AZ
I didnt install the tpms sensor on my XT’s. Just using the Rays stem

On the gramlights, you use the complete oem valve core + sensor on the wheel.

The rays valve stem does not accept the tpms sensor

But I could use the OEM rubber valve stems with TPMS on the XT's just like the oem wheel.
 
OP
OP
bvita

bvita

Full Access Member
Joined
Jul 14, 2019
Posts
159
Reaction score
197
Location
SoCal
But I could use the OEM rubber valve stems with TPMS on the XT's just like the oem wheel.

Correct, the OEM rubber stems + TPMS sensors mount up to the XT like any other wheel with no problem. I personally just wanted to use the rays valve stem on the XT.

Just reworded my previous message, reread it and I confused myself a bit lol.
 

Krazykorean

Full Access Member
Joined
Jan 3, 2017
Posts
144
Reaction score
50
Location
Mesa, AZ
Correct, the OEM rubber stems + TPMS sensors mount up to the XT like any other wheel with no problem.


Awesome thanks!

By chance do you know which rays center caps are available for the XT's? And how much you can get them for
 
OP
OP
bvita

bvita

Full Access Member
Joined
Jul 14, 2019
Posts
159
Reaction score
197
Location
SoCal
Awesome thanks!

By chance do you know which rays center caps are available for the XT's? And how much you can get them for

The large PCD (112mm center bore) from the Toyota te37x / te37xt does not fit the 6x135 (or jeep 5x127) Te37xt's.

Rays produced x3 total different center bores within the XT line up. Currently working with Rays to finalize completion of the center caps for the 6x135 - Raptor

IMG_7557.JPG
 

Krazykorean

Full Access Member
Joined
Jan 3, 2017
Posts
144
Reaction score
50
Location
Mesa, AZ
The large PCD (112mm center bore) from the Toyota te37x / te37xt does not fit the 6x135 (or jeep 5x127) Te37xt's.

Rays produced x3 total different center bores within the XT line up. Currently working with Rays to finalize completion of the center caps for the 6x135 - Raptor

View attachment 157255


Wow that looks weird lol.

Please update the thread when you guys do get one for Raptors. I am in for a set.
 
OP
OP
bvita

bvita

Full Access Member
Joined
Jul 14, 2019
Posts
159
Reaction score
197
Location
SoCal
Wow that looks weird lol.

Please update the thread when you guys do get one for Raptors. I am in for a set.

These are the center caps for the 6x139.7 / 5x150 xt’s

01D2C16D-F2F8-4FAA-B125-7DE1B1F26508.jpeg

Theyre quite large, and are mounted from behind the wheel. Given the smaller diameter of the raptor spec xt, these can’t be mounted.
 
Top