What did u do to your raptor today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Gary E

Full Access Member
Joined
Jun 11, 2017
Posts
917
Reaction score
732
Location
Medford, Oregon
Smooth as butter and super quiet. But I was coming from fairly bald KO2s that were humming pretty good. Cant beat the price of the grabbers though. And the 50k warranty.
Yes, they may be smooth and quiet, but anything similar is likely to be that way compared to wore out tires. My new KO2's are "smooth as butter and super quiet" compared to the old KO's they replaced. KO's also have a warranty. As you said, probably cheaper than KO2's.
 

nec9

Member
Joined
Oct 12, 2020
Posts
11
Reaction score
19
Location
PNW
Yes, they may be smooth and quiet, but anything similar is likely to be that way compared to wore out tires. My new KO2's are "smooth as butter and super quiet" compared to the old KO's they replaced. KO's also have a warranty. As you said, probably cheaper than KO2's.

Exactly. Yeah saved about $200 and they got the same warranty. I like the tread pattern and can go white letter out if I want. We will see how they do in the snow.
 

codeman

Full Access Member
Joined
Nov 2, 2020
Posts
114
Reaction score
109
Location
Canada
Installed the Husky wheel well liners. Driver side went on pretty easy and quick, but the passenger side needed a little trimming and a couple of the holes didn't align perfectly which was a bit annoying. Oh well, not really noticeable unless you know where to look but overall look great and provide better protection especially in the salty winters up here in Canada. Just realized the photo I took was before I finished drilling the hole and installing the 2nd screw ... aw well :)

Also did a complete degrease and prep to coat every chassis component I could get at with a thin coat of POR15, and will top it off with a bit of AMSOIL for peace of mind.

Next up ... BlackFriday order of Baja Designs fog light kit from 4x4 TruckLeds I'm excited to install!

IMG_0226.jpeg
 

SVTTrooper

Full Access Member
Joined
Aug 21, 2018
Posts
686
Reaction score
819
Location
AB Canada
Installed the Husky wheel well liners. Driver side went on pretty easy and quick, but the passenger side needed a little trimming and a couple of the holes didn't align perfectly which was a bit annoying. Oh well, not really noticeable unless you know where to look but overall look great and provide better protection especially in the salty winters up here in Canada. Just realized the photo I took was before I finished drilling the hole and installing the 2nd screw ... aw well :)

Also did a complete degrease and prep to coat every chassis component I could get at with a thin coat of POR15, and will top it off with a bit of AMSOIL for peace of mind.

Next up ... BlackFriday order of Baja Designs fog light kit from 4x4 TruckLeds I'm excited to install!

View attachment 156669

how do you like the live valve shocks on your Gen 1? seems kinda pointless to run them over a 3.0 king, Icon or fox.. unless you got them off of kijiji for cheap.
 

Jonny V

FRF Supporting Member
Supporting Member
Joined
Mar 22, 2019
Posts
712
Reaction score
668
Location
Carnation, WA
Installed the Husky wheel well liners. Driver side went on pretty easy and quick, but the passenger side needed a little trimming and a couple of the holes didn't align perfectly which was a bit annoying. Oh well, not really noticeable unless you know where to look but overall look great and provide better protection especially in the salty winters up here in Canada. Just realized the photo I took was before I finished drilling the hole and installing the 2nd screw ... aw well :)

Also did a complete degrease and prep to coat every chassis component I could get at with a thin coat of POR15, and will top it off with a bit of AMSOIL for peace of mind.

Next up ... BlackFriday order of Baja Designs fog light kit from 4x4 TruckLeds I'm excited to install!

View attachment 156669

Did you go with the KHC custom front mounts to get those shocks to fit? How are you controlling the shocks in their live mode?
 

PorterW1111

FRF Addict
Joined
Apr 19, 2020
Posts
1,448
Reaction score
2,038
Location
Florida
how do you like the live valve shocks on your Gen 1? seems kinda pointless to run them over a 3.0 king, Icon or fox.. unless you got them off of kijiji for cheap.

Did you go with the KHC custom front mounts to get those shocks to fit? How are you controlling the shocks in their live mode?

ohhh give him a break he is new..lol Plus those Canadians are a little slOw ya knOw...haha @CoronaRaptor fix ya mate lol
:chewie:
 
Top