Raptor Auxilary Trailer Power

Hey guys, I just bought a small new enclosed trailer with an electric jack and interior lighting. The raptor runs all of the exterior trailer lights perfect but it will not power the electric jack or turn on the interior lights.
Any idea what maybe causing this? Dealer is pretty lost. I’ve heard maybe the truck needs some fuses that are not installed from the factory?

I am not aware of it having that feature. It doesnt even have an outlet of power in the bed area. I had to run a line from under the hood all the way to the rear to be able to have access to power

My enclosed trailer will run the interior lights as long as the truck is running or in ACC position. I believe you should have a main junction block on your trailer and to run the jack I think you would need to run a battery to that - at least that is how mine is set up.

Are you sure the trailer is actually wired to pull power from the 7 pin for those accessories?

Close all the doors and leave your key inside the vehicle while it's running

jabroni619 said:

Are you sure the trailer is actually wired to pull power from the 7 pin for those accessories?

Click to expand...

Yes I believe so, I had my friend bring his ram 1500 over and it ran everything fine.

Nice rig.

Winchester30 said:

Nice rig.

Click to expand...

Thanks. I just wish my raptor could hook onto it. Hopefully soon enough.

Have you talked with the trailer manufacturer? Maybe they can give you some insight with hooking it up to a Raptor.
Does anyone know if the Raptor 7 pin is any different than a regular F150?

Nice setup you have!

The truck has to be powered up... as in running or the lights on to put power to the trailer. I found The lights on the truck need to be on not on auto to push power through the 7 pin. You can add a battery and charger to the trailer if you need power while the truck isn’t running.