Anyone here running Roadmaster Active Suspension?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

WoahItsRob

Full Access Member
Joined
Sep 16, 2020
Posts
172
Reaction score
116
Location
Virginia
I recently installed to help raise the back end up to reduce sag under acceleration and towing. I haven't noticed any/as much wheel hop on highway speeds going around a sharp curve and hitting a rough road patch so thats a big plus. All in all, I'm happy with the purchase and ease of install. I'd recommend it, but don't do any hard core off roading

Sent from my SM-N986U using Tapatalk
 
OP
OP
C

Cody Templeton

FRF Addict
Joined
Oct 29, 2020
Posts
1,273
Reaction score
996
Location
Des Moines, IA
I recently installed to help raise the back end up to reduce sag under acceleration and towing. I haven't noticed any/as much wheel hop on highway speeds going around a sharp curve and hitting a rough road patch so thats a big plus. All in all, I'm happy with the purchase and ease of install. I'd recommend it, but don't do any hard core off roading

Sent from my SM-N986U using Tapatalk

I'm sure I'll end up going with it. Roadmaster said they'd give me a returning customer discount as well, so that's a bonus.
 

Ski4Ever

Full Access Member
Joined
Jan 23, 2019
Posts
501
Reaction score
166
Location
Denver, CO

WoahItsRob

Full Access Member
Joined
Sep 16, 2020
Posts
172
Reaction score
116
Location
Virginia
What's the part number of the kit you ordered? Is this it? And if so, did you get the standard or heavy duty kit? Please follow up here (in this thread, preferably) once you've got it installed to let us know what you think!

https://activesuspension.com/products/kits/2009-2016-ford-f-150-supercrewext-cab/
Thats the one I grabbed in the standard. Didn't even know there was a heavy duty version lol
My back end is sitting at 43 and 1/8th inches from the ground to the fender well. Eibach springs in the front have me sitting at 42 and 7/8th inches
I used the black shim on the RAS

Sent from my SM-N986U using Tapatalk
 
OP
OP
C

Cody Templeton

FRF Addict
Joined
Oct 29, 2020
Posts
1,273
Reaction score
996
Location
Des Moines, IA
What's the part number of the kit you ordered? Is this it? And if so, did you get the standard or heavy duty kit? Please follow up here (in this thread, preferably) once you've got it installed to let us know what you think!

https://activesuspension.com/products/kits/2009-2016-ford-f-150-supercrewext-cab/

2691 is the correct part number for the 10-14 Raptor. It bolts under the U-bolts rather than around the spring pack like the normal F-150's. I called Roadmaster to verify for sure I was ordering the proper kit because if I could have I'd just have pulled the kit off the 13 Limited to use on the 13 Raptor. There's no option for a heavy duty kit for the Raptor, just standard.

I also ordered the ReadyLift 3" OE-style rear blocks as well. I'm currently 1" lower in the back than the front. The 3" block should give me about 1/2" more height, and then I'm expecting the RAS should give about 1-1.5" based on my install on my 13 Limited. I want to get about 2" out of the back so that it sits just a bit higher than the front.
 

Ski4Ever

Full Access Member
Joined
Jan 23, 2019
Posts
501
Reaction score
166
Location
Denver, CO
2691 is the correct part number for the 10-14 Raptor. It bolts under the U-bolts rather than around the spring pack like the normal F-150's. I called Roadmaster to verify for sure I was ordering the proper kit because if I could have I'd just have pulled the kit off the 13 Limited to use on the 13 Raptor. There's no option for a heavy duty kit for the Raptor, just standard.

I also ordered the ReadyLift 3" OE-style rear blocks as well. I'm currently 1" lower in the back than the front. The 3" block should give me about 1/2" more height, and then I'm expecting the RAS should give about 1-1.5" based on my install on my 13 Limited. I want to get about 2" out of the back so that it sits just a bit higher than the front.
Ohhh, I didn't realize you had Gen-1 Raptor. Yep, according to the Application Guide, 2691 is for the Gen-1, and 3611 is for the Gen-2.
 
Top