Stuck in the sand

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

TurboTJ

Full Access Member
Joined
Apr 19, 2019
Posts
495
Reaction score
373
Location
Denver, CO
That first one looked avoidable to say the least.

We dropped in to say hi to Matt a couple of weeks ago when in Utah. He’s a good guy but it took him way too long to buy some beadlocks and proper tires for his Jeep.
 

Muchmore

FRF Addict
Joined
Dec 23, 2018
Posts
1,428
Reaction score
2,494
Location
Kansas City
Geez guys....momentum---momentum----momentum. I love watching people trying to "power up hills" in the sand.
 

Ski4Ever

Full Access Member
Joined
Jan 23, 2019
Posts
501
Reaction score
166
Location
Denver, CO
What happens on the dash at 5:58? The driver reaches down to something on the console (with his left hand, which seems awkard, and that's what caught my attention) and at the same time the display on the dash looks like it switches to the front camera for about a half second or so and then switches back to the map. How is that possible?

Capture.JPG
 

lateralis

Full Access Member
Joined
Jul 22, 2019
Posts
311
Reaction score
183
Location
Oregon
What happens on the dash at 5:58? The driver reaches down to something on the console (with his left hand, which seems awkard, and that's what caught my attention) and at the same time the display on the dash looks like it switches to the front camera for about a half second or so and then switches back to the map. How is that possible?

View attachment 154731

In mud/sand or baja mode at low speeds the front camera is on. Once you get over like 5-10 mph the camera turns off. So the driver is probably somewhere between 5-15 mph going up and down in speed. It's kind of annoying and I wish there was a way to control that better.
 

flynford

Active Member
Joined
Aug 5, 2011
Posts
58
Reaction score
25
Location
San Jose, CA
It amazes me on how many folks who know and/or heard about airing down; however, reluctant to do so and then get into a jam. Anyone who has a rig with a winch or with a very capable rig cruising around will know the burden of going out on the trails. Almost can't go out without being flagged down for a stuck or rolled rig. Can't tell you how many times I get asked how come I can go around so easily on the Raptor which has no winch but I tell them airing down is the simplest and most important thing to do. I have another rig with a winch and that's a magnet for stuck/roll-over rigs. AIR DOWN Y'All!!!!

I heard the fellow saying going down to 10psi, yeah that's great but a little too low without beadlocks. Cutting down the road pressure by half is a starting point. My go-to is 18-20psi. It's nearly impossible to get stuck in my Gen-1 with that.
 
Top