GEN 2 Anyone Run this SVC Stage 1 Starter Setup??

Does anyone have this on your Gen 2 w Deaver +3” ?? How does it ride?
https://svcoffroad.com/collections/...ts/stage-1-starter-kit?variant=28556660768846

I have the deavers and SVC bump stop kit. Everything lined up and was an easy install. I haven’t had any issues. I wish you didn’t have to grind off the ABS sensor line attachment to mount the bump plate. But they give a spot to mount the line

Dustan said:

I have the deavers and SVC bump stop kit. Everything lined up and was an easy install. I haven’t had any issues. I wish you didn’t have to grind off the ABS sensor line attachment to mount the bump plate. But they give a spot to mount the line

Click to expand...

Dustan, Are you running 37's on yours? Also, are hydra bumpstops not needed on the front?

I’m running 35’s. I’ve seen front bumps but I don’t think I’ll ever get to that level

SVC all the way.

so if the op is fairly serious, the deavers and bump stop is permanent but you probably at least want eibach or geiser springs at the front instead of a collar, new shackles would be smart too

SVC produces some high quality parts, I ran this setup with their billet uppers until my 3.0 live valve shocks came in and it performed very well. I recommend you not crank the CAS system up too high, it will cause the ride to get pretty bouncy up front. I went with the Fox 2.0 ifp bumps.

Ugh... Why would you run collars over springs in the front??? Because svc doesn't make a front spring?? Lol

Wow, there’s a lot more involved than just bolting on that kit.....my head hurts already....crap!

Jace21583 said:

Ugh... Why would you run collars over springs in the front??? Because svc doesn't make a front spring?? Lol

Click to expand...

Would you suggest doing the SVC rear portions (deavers and bump stops) and then run springs in the front? The truck would ride better I take it?