grabbing switched power from roof console AUX1?

WHOSNEXTU · Sep 25, 2020

I do allot of Highway driving to work and want to add radar detector, Why cant i grab power from Aux1 switch at roof console? has anyone done this? any info would be great..

The Car Stereo Company · Sep 25, 2020

the wires at the switch are only designed to power the relays. trying to tie into the wires there will most likely result in a blown switch panel.

CoronaRaptor · Sep 25, 2020

WHOSNEXTU said:
I do allot of Highway driving to work and want to add radar detector, Why cant i grab power from Aux1 switch at roof console? has anyone done this? any info would be great..

Look in your owners manual, it tells you how to wire up to the switches. Or do a search on here.

PlainJane · Sep 25, 2020

Rockbuster said:
We have two 15 amp, two 10 amp, and two 5 amp switch circuits. Aux 1-4 are the 15 and 10 amp and share the same wire size (20ga?). Aux 5-6 are only 5 amp and have a smaller wire (24ga?)

Check the amperage of your detector and then use the smallest circuit that has enough amperage. I would bet you could use Aux 5 or 6.

Mike K · Sep 26, 2020

Winchester30 · Sep 26, 2020

Google mirrortap, might be a better option.

grabbing switched power from roof console AUX1?

WHOSNEXTU

Member

The Car Stereo Company

aka grumpy car stereo guy

CoronaRaptor

FRF Addict

PlainJane

Full Access Member

Mike K

Member

Winchester30

FRF Addict

Similar threads

Members online

Forum statistics

Latest posts