OEM security add on?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

REX111

Full Access Member
Joined
Aug 11, 2020
Posts
228
Reaction score
193
Location
Sussex
Has anyone installed the OEM ford security module? Part number FT4Z19A361A . If so what does it do. Dealership isn’t much help. They say it adds remote start features. I already have remote start. I was looking for more of an alarm.
 
OP
OP
REX111

REX111

Full Access Member
Joined
Aug 11, 2020
Posts
228
Reaction score
193
Location
Sussex
The only thing i can find is that you can add 1 of 3 remotes for autostart capability. one way, two way, and one with a lot of range. you can also add a security light as well. i cannot find any info if this is a security module.
 

Cain

Member
Joined
Jul 20, 2020
Posts
42
Reaction score
13
Location
California
I believe its a shock sensor just like the one I added for my 2020.

I also have the remote start before I purchased my module and the remote start function was retained after I installed it.

Mine was KN1Z-19A361-A and was a plug and play unit.
 

dhmcfadin

Full Access Member
Joined
Mar 27, 2018
Posts
553
Reaction score
240
Has anyone installed the OEM ford security module? Part number FT4Z19A361A . If so what does it do. Dealership isn’t much help. They say it adds remote start features. I already have remote start. I was looking for more of an alarm.
That’s the perimeter plus module AKA shock sensor. One of the best investments you can make. My truck was broken into a week after I bought it. No shock sensor so when they broke the glass, the alarm didn’t go off. I added the shock sensor, now when anyone or anything touches my trucks it gives a warning honk. If the shock persists, the module sounds the alarm.
 
OP
OP
REX111

REX111

Full Access Member
Joined
Aug 11, 2020
Posts
228
Reaction score
193
Location
Sussex
So if this is the shock sensor add on where does it install at? Also is there a way to test or see if this module is installed already. I bought my raptor used.
 

PlainJane

Full Access Member
Joined
Apr 3, 2019
Posts
748
Reaction score
431
Location
San Diego, California
The number OP posted is for the GEN 1 FT4Z19A361A
search "OEM Genuine Ford Parts Scalable Shock Security System Kit" for the thread on GEN 2
Has pictures where they are installed.
 
Last edited:

Cain

Member
Joined
Jul 20, 2020
Posts
42
Reaction score
13
Location
California
The part number I posted is for a gen 2. I made a bracket for it that bolts on to the area above the left side of the brake pedal assembly.

It works well for what it's worth and work with the ford pass app on mine. I made a led light assembly that plugs to the two pin connector on the module as well.
 

Cain

Member
Joined
Jul 20, 2020
Posts
42
Reaction score
13
Location
California
So if this is the shock sensor add on where does it install at? Also is there a way to test or see if this module is installed already. I bought my raptor used.

Look under the dash and see if you can find a box with a small knob on it.

Another is with the doors locked, if you knock hard on the windshield near the driver side or if you pull hard on the door handle, it should honk once.
 
Top