GEN 1 Forscan Changes you made to your Gen1?

The turn signal flash mod sounds awesome. I'm doing that this weekend, the 3 flash is silly. Not enough for a lane change unless you're yanking the wheel over lol.

Has anyone confirmed where we can set TPMS alert pressure? I'd like to move that down to 15psi or 20psi so I can actually use it as a flat indicator offroad when i set my pressures to 25psi or so.

letsgetthisdone said:

...has anyone confirmed where we can set TPMS alert pressure? I'd like to move that down to 15psi or 20psi so I can actually use it as a flat indicator offroad when i set my pressures to 25psi or so.

Click to expand...

If my memory isn't failing me, it can only be set down to 32psi.

IDI-Charlie said:

If my memory isn't failing me, it can only be set down to 32psi.

Click to expand...

I could see that with a factory scan tool. Hopeing its different when we actually have access to the code, vs an interface chaging the code for us based on the number we punch in.

letsgetthisdone said:

I could see that with a factory scan tool. Hopeing its different when we actually have access to the code, vs an interface chaging the code for us based on the number we punch in.

Click to expand...

Checked the forscan spreadsheet I have on my phone, all I had was a setting for high and low range. Will have to dig up the master on my computer to see if it has any more info.

I know the Super Duties can be set to the desired pressure via hex, but I'd have to do some digging to verify compatibility with the Raptor.

IDI-Charlie said:

Checked the forscan spreadsheet I have on my phone, all I had was a setting for high and low range. Will have to dig up the master on my computer to see if it has any more info.

I know the Super Duties can be set to the desired pressure via hex, but I'd have to do some digging to verify compatibility with the Raptor.

Click to expand...

Appreciate it man. Lmk if you can figure it out.

I'll mess with tire pressure tomorrow, that spreadsheet implies it can be set to whatever you want using decimal to hex: https://www.rapidtables.com/convert/number/decimal-to-hex.html?x=20

SVTRap said:

Its a fantastic resource....

So a few things I have done to my truck with Forscan:

• Turned Off DRLs for the LED Headlights
• Disabled HyperFlash for the LED turn signal bulbs
• Programmed a Sync 3 APIM module from an Explorer so it would work with my truck and added the prerequisite Ford Performance Raptor load screen
• Chase down DTCs and reset

Im sure Im forgetting a few but I'll also be using it to turn on ambient lighting once I get to that point and Im still using it to try and chase down an issue with my upgrade to Sync V3.4

Click to expand...

For LED headlights, did you just disabled DRL? Forscan OBDII adapter is still on the way so I have no idea what it looks like on computer. I looked at a spreadsheet online, it has 4 options?

oplersx said:

For LED headlights, did you just disabled DRL? Forscan OBDII adapter is still on the way so I have no idea what it looks like on computer. I looked at a spreadsheet online, it has 4 options?

726-11-01	0001	0000	40	DRL Disabled
726-11-01	0101	0000	41	DRL Enabled, Low Beam
726-11-01	0201	0000	42	DRL Enabled, Fog Lights
726-11-01	0301	0000	43	DRL Enabled, Turn Signals

Click to expand...

Correct and on this one you can toggle the setting without having to get into adjusting the address value as you have shown above (once you have the program up and running it will make a little more sense).

ForScan is a great tool, have used it on all 3 Raptors for one thing or another. Also a great tool when you are chasing down issues or just want certain things to function a certain way. Im sure there are more things, just dont remember all of them without looking at the laptop I run ForScan on..lol

- Turn indicator 5 flash
- TPMS set to 30psi and then just shut off completely when I went to 6 - 37's
- Tire Size adjusted to 37's
- gear ratio (4:88)
- DRL set to marker lights
- Enable Auto start (2011)

Where is the change to 37's?