Roadmaster Active Suspension - Gen.2

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Wainwrcb

Member
Joined
Aug 13, 2020
Posts
16
Reaction score
6
Location
Royal Oak, MI
Any idea how much the 10% setting will raise the rear, also in case I missed it did you go with the Standard or Heavy duty??? They have both listed on their website. Im just looking at all my options for fighting axle wrap/wheel hop for the choppy roads we have all over NE Ohio.

If you mean 25% (Two gage shims are provided; one for setting to 25% and another for 40%) I am estimating probably around an inch. The Raptor takes a different part number than the regular F-150s. It is a standard duty.
 

Boosting

Member
Joined
Nov 7, 2019
Posts
5
Reaction score
1
Location
Plano, TX
If you mean 25% (Two gage shims are provided; one for setting to 25% and another for 40%) I am estimating probably around an inch. The Raptor takes a different part number than the regular F-150s. It is a standard duty.

Did you do the install yourself? If so, how difficult was it?
 

Tr4ckD4ys

Full Access Member
Joined
Nov 24, 2019
Posts
229
Reaction score
189
Location
Midwest
Ordered mine too and will have it installed in a few weeks - will report back how it does on stock springs... I went this route + RPG collars because it'll level the truck and make it more capable as opposed to spending 2200+ on deavers & geisers (just yet).

Now what i am wondering is if this will at all allow a higher load in the bed, over the 1000lbs rated payload...
 

Swaddict

Full Access Member
Joined
Feb 22, 2020
Posts
215
Reaction score
237
Location
New Smyrna Beach, Fl
Ordered mine too and will have it installed in a few weeks - will report back how it does on stock springs... I went this route + RPG collars because it'll level the truck and make it more capable as opposed to spending 2200+ on deavers & geisers (just yet).

Now what i am wondering is if this will at all allow a higher load in the bed, over the 1000lbs rated payload...

the kit comes with 2 spacers, one is a payload increase of 25% and the other is an increase of 40% payload capacity, per Roadmaster
 

Ski4Ever

Full Access Member
Joined
Jan 23, 2019
Posts
501
Reaction score
166
Location
Denver, CO
Mine touches, the bushing is not indented or damaged. I just checked both sides. It's not a problem
Does it touch while you're truck is sitting level? If so, isn't it going to hit quite a bit more as the suspension compresses if you hit a big bump?
 
Top