What did you do to your Raptor today? (Gen2)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

CHMP

Full Access Member
Joined
May 28, 2019
Posts
274
Reaction score
143
Location
Santa Cruz
https://swarfworks.com/shop/ols/products/2017-ford-raptor-front-license-plate-relocation

NY with the front plate also. I ordered my @Swarfworks plate bracket the day the truck showed up. The thing is rock solid. My main goal was to not block the factory intercooler location. I did come across your choice as well, but opted for the Swarf after reading reviews and seeing his other offerings.

Agreed I have the SW bracket and that thing is about as well made as you could hope for. Only thing I wish is a quick disconnect like the CJ Pony one. Carwash robots don't like that SW bracket, ask me how I know.
 

Rednose

Full Access Member
Joined
Apr 27, 2019
Posts
484
Reaction score
592
Location
Dubai
I’ve been trying to solve this exact problem forever! Looks like an elegant solution. My plans are to run an intercooler just like the Cobb but maybe half as tall. Performance isn’t a huge concern but cooling and adding a place for a winch are.

‘You gonna do any air ducting?

Nope no plans for air ducting for now but I might do it later.

I have no idea if you have an overheating problem but so far the best solution for overheating that worked for me was changing the inter-cooler material not the design.
 

TrewRaptor

Full Access Member
Joined
Feb 14, 2020
Posts
117
Reaction score
64
Location
Tucson AZ
Changed my oil for the first time on Raptor. Dealership had done the first 2 for free, but I always like to change my own. HOLY CRAP, what a mess. I read up on tips and ideas, I knew it was going to be messy, but dang. Oil dripping out of skid plates all over. My 15 KR with an ecoboost was nothing like this. I put the Fumoto valve in and expect my next oil change to be much cleaner. Now back to cleaning up my garage floor. :)

Edit: Now Sunday morning and I now know how to remove the skid plates and de-oil them. ugh. Just couldn't take it with oil dripping out of every hole in a skid plate. Oh well, always good to get underneath your truck, learn and look around.
I just remove the skid as well. Broke a couple of the cheap factory spring nuts and replaced them all with a better quality version.
 

JAndreF321

Full Access Member
Joined
Mar 20, 2020
Posts
194
Reaction score
160
Location
Lacey, WA
I also added a Weboost cell phone booster. I did a ton of research and ended up with this. I was limited by garage door height and this antenna is just a little bit taller than the one on the roof.

The antenna on the front of the roof with a magnetic sticker. Internal antenna is stuck on the bottom of the center console and the booster under the passenger seat. I also wired it to upfitter switch 4. The worst part was fishing the antenna wire through the existing hole in the firewall with other wires just behind the pedals.

View attachment 149486

View attachment 149487

View attachment 149488

Just looked this up, a lot more expensive than I thought. The reviews were all amazing though. Let us know how it goes.
 

dblack

Full Access Member
Joined
Sep 15, 2019
Posts
406
Reaction score
304
Location
Alabama
Looks good! What color did you do the rings?
It was called P8 at the shop. We looked at several options that were paint with powder clear on top, but went with the P8 because it was powder silver with powder clear on top.
 

Antho

FRF Addict
Joined
Apr 12, 2019
Posts
1,820
Reaction score
2,324
Location
Texas
Nothing Crazy but added Rigid Spots, Flood and Baja Design Driving. They are all out of whack, Just waiting for the evening to straighten them out.

Lights_LI.jpg
 
Last edited:
Top