Anyone Have This?
- Thread starter MDJAK
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Ricoman
Full Access Member
Not same ones,but put these on mine last year,they are machined Heavy Stainless Steel and are held on with 3 strips of really strong 3M Glue..the strips run the entire lengh of the Sill Plate.Have had no problems them...was afraid the glue wouldnt hold up,but they are on for good...LOL
Got them from AmericanTruck.com thinking around $249 for pair.
Last edited:
If you're planning on using it as a rock slider, I would not buy it. I havent checked the details but I saw the comment that its 2 pieces. Definitely a no go since it doesnt add structural support. Land on a rock with that and you'll still have pinched doors.
If it's for looks then go right ahead
If it's for looks then go right ahead
It goes on the door sills. Rock sliders go under truck. But ty.
Todd Turbo S
Full Access Member
I had mine covered with Paint Film Protection for $100. Covers more area and cost effective. Than I applied Ceramic Coating over the film. I have a German Shepard and Greater Swiss Mt Dog that jumps in and out of my Raptor. This product protects the painted areas well.
Ahhh my mistake. The picture on the site with the link you provided made it look like a "special" rock slider. Yes very special
richnot
Full Access Member
They look like they would offer protection from dogs and boot tips/laces from the Ford tech changing the oil. When I returned home and looked at the truck for obvious damage it looked like he had work boots that have the metal hooks for the laces on them and they left their mark on the sill/rocker.
I spoke to the Service manager the next day and asked me to stop by and he will check it out. He agreed that it happened there after checking on who did the service and personally going and checking his boots out. I was told to bring it by at my convince and the body shop will most likely buff it out. I don`t know about doing that
Now to protect it in the future I have looked into the Bushwacker protectors mentioned in post above, but the issue is the factory Raptor sill plate, the Bushwacker kit would need to be trimmed to fit. This is what I was told and I wonder if the ones from Ford are made to fit a Raptor
The other option also mentioned above it to have it PPF`d and not worry about it at all, I looked into what 3M offers and they have a big selection it you want a DYI. All on Amazon
I spoke to the Service manager the next day and asked me to stop by and he will check it out. He agreed that it happened there after checking on who did the service and personally going and checking his boots out. I was told to bring it by at my convince and the body shop will most likely buff it out. I don`t know about doing that
Now to protect it in the future I have looked into the Bushwacker protectors mentioned in post above, but the issue is the factory Raptor sill plate, the Bushwacker kit would need to be trimmed to fit. This is what I was told and I wonder if the ones from Ford are made to fit a Raptor
The other option also mentioned above it to have it PPF`d and not worry about it at all, I looked into what 3M offers and they have a big selection it you want a DYI. All on Amazon
Similar threads
