GEN 2 Stock offset (+25mm) 17” wheels?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BroncoAZ

Full Access Member
Joined
Sep 27, 2019
Posts
964
Reaction score
734
Location
Cape Cod, MA
I’m interested in possibly upgrading the wheels on my ordered Raptor. I want to stick with something close to stock offset, probably no more than +25mm and I’d prefer hub centric. I have found a few, but most of the wheels are 0 offset which is not what I’m going for. Powder coating my stock wheels is also an option. Here is what I’ve found so far.

Method 313 in +25mm
2BB72E23-9494-4C70-AF9B-2329D874E54F.png

Method 310 +35mm
01B3BDB1-ABFA-43C7-AE3B-D59768A4B722.png
 

Droid

kglesq's Brother
Joined
Sep 25, 2010
Posts
1,483
Reaction score
753
Exact same problem here, but annoyed enough that I'm sticking with stocks for a bit.

  • AlphaEquipt are +25.
  • Some Black Rhino wheels are available with offsets as well (I think 18 or 25, but forget).
  • Motegi Trailite's can be had in +18.
  • Icons can be had in +6, but I imagine that's not enough.
  • Raceline has some +18, e.g., the Clutch.
Leaning toward 313 or 310 though if I can find a great sale, but may just not bother.
 
OP
OP
BroncoAZ

BroncoAZ

Full Access Member
Joined
Sep 27, 2019
Posts
964
Reaction score
734
Location
Cape Cod, MA
Thanks, I found the AlphaEquipt on tire rack after you posted. They have a tool to sort by offset. There is also a set from Sparco that look decent. As for color I ordered a Leadfoot truck, so I was thinking bronze as black and grey won’t look that great. They also make red, but I’m not a 20 year old kid.

BE27BC61-D006-4CEC-82E1-A618E5FBCFD8.png 5939A7CB-BB5D-47E5-8661-2308A7CA2A3A.png 917792F5-029B-4C26-AEDE-4D054BB8868F.png
 

Jurasick

Full Access Member
Joined
May 31, 2019
Posts
138
Reaction score
152
Location
Madisonville, LA
Powder coated mine triple bronze satin. Was in the same boat with finding something with the right offset. Didn’t want to rip fender flares off when off-road. 9cc312ba0fc6ebe67ec7c0ec3ef1d403.jpg


Sent from my iPhone using Tapatalk
 

smurfslayer

Be vewwy, vewwy quiet. We’re hunting sasquatch77
Joined
Dec 16, 2016
Posts
16,074
Reaction score
23,549
I’m interested in possibly upgrading the wheels on my ordered Raptor. I want to stick with something close to stock offset, probably no more than +25mm and I’d prefer hub centric.

So, are you sticking this close to the stock (+34 IIRC)
a) to ensure you don’t get rubbing while out doing hooligan antics with the truck? b) Aesthetics?
c) don’t want additional debris slung by decreased offset?
d) some combination of the above?

I’ve been in touch with Justin about a) as a main concern and he seemed to think a +18 would be ok on even ’17-’18 trucks.
 
OP
OP
BroncoAZ

BroncoAZ

Full Access Member
Joined
Sep 27, 2019
Posts
964
Reaction score
734
Location
Cape Cod, MA
So, are you sticking this close to the stock (+34 IIRC)
a) to ensure you don’t get rubbing while out doing hooligan antics with the truck? b) Aesthetics?
c) don’t want additional debris slung by decreased offset?
d) some combination of the above?

I’ve been in touch with Justin about a) as a main concern and he seemed to think a +18 would be ok on even ’17-’18 trucks.

A and C, and I do plan on some Hoon shit. First mod will be Deavers and pneumatic bumps, my truck won't just be a street queen but I won't be flogging it with complete disregard. I'm looking at the rockblocks mudflaps too.
 
Top