What did you do to your Raptor today? (Gen2)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

tom wansor

Full Access Member
Joined
Nov 13, 2019
Posts
267
Reaction score
134
Location
new york
Installed my Eibachs this morning. About five hours all in with me taking my time. Worst part was the sketchy ass spring compressors. About a half inch higher in the back than front now with option two Icons and RPG extended shackles. I’m super happy.
Also painted my tow hooks but got really bad runs, so going to sand blast and start again another day.
42cb5b3cb4b477055f389129976a4147.jpged3411f52e025dd5400bf29a5ee0d0f6.jpg



Sent from my iPhone using Tapatalk Pro
I ended up 1/2 inch high in back too. Just what I wanted. How do you like ride with option 2?
 

Johnfaeglasgow

Full Access Member
Joined
Jun 8, 2019
Posts
245
Reaction score
212
Location
Kansas
I ended up 1/2 inch high in back too. Just what I wanted. How do you like ride with option 2?
I really like the ride with option two! I haven’t driven it yet since I did the shackles or the front springs. I’ll probably drive it Monday [emoji2371]


Sent from my iPhone using Tapatalk Pro
 

Burr55

Member
Joined
Mar 1, 2020
Posts
27
Reaction score
41
Location
Ohio
Installed Baja Designs S2 Reverse Light Kit from OffRoad Alliance last weekend connected to Aux switch 6. Re-ran the wiring today through the frame rail and used braided nylon sleeve based everyone’s posts on other threads. Turned out really well. Much cleaner install. e872c443efd5a904bbc9a512c67cabe2.jpg
2864f510c5d283415a0fad15767374b8.jpg
2nd pic is coming out of the front wheel well through the frame up into the engine compartment. Not noticeable unless you are the putz that did it and keeps looking at his work. Lol

c8878e838bd988f36124d1731effe42b.jpg

I’m not very mechanically inclined, but learning ... lots of great advice on this forum. Thanks!b0c65f448635896f846d0aa418b15b06.jpg
 
Last edited:
Top