Eibach springs

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

NEOGARAGE

Supporting Vendor
Supporting Vendor
Joined
Jan 18, 2019
Posts
577
Reaction score
183
Location
North Royalton, Ohio
Im betting most shops just hit it really well with a strong impact gun. Many guys who have worked on these trucks probably have a feel for it with there big gun. Would hate for this to come loose!
Even if it does come loose, it’s going to take a lot for the bolt to slide out while under pressure of the shock, but the threads on it are tight, and the nut itself is a nyloc nut. The torque is somewhere in the 400s
 

txgunsntrucks

Full Access Member
Joined
Jan 18, 2020
Posts
507
Reaction score
291
Location
texas
hi,

I am about to do the same - did you guys do all the work ?

did you follow a members post or ?

I am looking to figure out what size tools are needed.

Thanks !
Paul


get on youtube. a few have done it on there. if you don't have a 1/2 impact. get one
 
Top