Deaver L84 +3 springs

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

CHMP

Full Access Member
Joined
May 28, 2019
Posts
274
Reaction score
143
Location
Santa Cruz
Just ordered a set, really stoked. I initially ordered Eibachs to level things out, then decided I missed the rake.

How are you guys enjoying aftermarket leafs? I hear they are a huge upgrade in daily driving.
 

tom wansor

Full Access Member
Joined
Nov 13, 2019
Posts
265
Reaction score
133
Location
new york
I have icons on option 2 with drop shackles and love them. So much better than stock springs. Hard to describe improvement.
 

Kyle Nezat

Full Access Member
Joined
Oct 25, 2019
Posts
144
Reaction score
25
Location
Louisiana
I have deaver +3 super duty on order and also going on will be rpg bump stop kit with king bumps will let y’all know once I install everything
 
OP
OP
CHMP

CHMP

Full Access Member
Joined
May 28, 2019
Posts
274
Reaction score
143
Location
Santa Cruz
I have deaver +3 super duty on order and also going on will be rpg bump stop kit with king bumps will let y’all know once I install everything

Ahhh. I know it's just a matter of time before I do real bump stops, just want to break up the cost. I'm starting with forged off-road bump pads.
 
OP
OP
CHMP

CHMP

Full Access Member
Joined
May 28, 2019
Posts
274
Reaction score
143
Location
Santa Cruz
Gearing up for my install. What are y'all using for metal coating? My experience with Deavers in the past is they end up looking a rusty mess after ~1 year. I'm sure it's mostly superficial, but figured this time around might as well hit them with a good few coats of something.

Amsoil MP HD looks like good stuff?
 
R

Rick@FreedomMotorsports

Guest
Gearing up for my install. What are y'all using for metal coating? My experience with Deavers in the past is they end up looking a rusty mess after ~1 year. I'm sure it's mostly superficial, but figured this time around might as well hit them with a good few coats of something.

Amsoil MP HD looks like good stuff?

that’s we recommend and sell. On mine, I applied 4 coats. Took a couple days. I loosened the center pins so I could get inbetween. Coat and let dry, spray another coat, dry, repeat

need at least 2 cans but I recommend getting more because about every 6 months, its worth touching up.
 
R

Rick@FreedomMotorsports

Guest
I’ve got mine on order. The installer is going to take them apart and I’m powder coating them black.

that will eventually crack and then moisture will get trapped causing more rust over time. Deaver used to powder coat them on special orders, they no longer will do it. Using AMSOIL HDMP is your best defense.
 
Last edited by a moderator:
Top