What did you do to your Raptor today? (Gen2)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

JoeCaMotto

Member
Joined
Mar 15, 2018
Posts
46
Reaction score
30
Location
Chitown
I want to give a shout out to my guy Kamil for a awesome job on my truck. I use my truck for work I have a flooring company so I use it to carry flooring, plywood etc.
And It stays out side not a garage queen. He’s price is very reasonable also.

AA859B5E-92CC-4B6C-96E1-CFE2C90D79B3.jpeg
 

07_S3VA

Member
Joined
Mar 10, 2017
Posts
17
Reaction score
1
Picked my truck up from service at dealership. Now I have heating/cooled seats and rear defroster that work properly again. The fan for the cooled seats is much louder now. 3 days in Ford Edge loaner was rough.
 

Dale K

Member
Joined
May 13, 2020
Posts
44
Reaction score
72
Location
Tualatin, Oregon
Ohhhhhh, changed a bunch of settings with Forscan, ran a downframe harness with 6 spares, wired in my canopy for brake lights-12vdc power-canopy door lock actuator....little stuffs like that
 

nikhsub1

FRF Addict
Joined
Mar 5, 2017
Posts
4,106
Reaction score
4,692
Location
Los Angeles
I attempted to install my new RPG shackles but no joy. I could not get the upper bolt out that holds the shackle to the spring. The frame is in the way no matter how high or how drooped I made the rear end. While I was in there I did some rust removal and some lubrication.
 

Johnfaeglasgow

Full Access Member
Joined
Jun 8, 2019
Posts
245
Reaction score
212
Location
Kansas
I attempted to install my new RPG shackles but no joy. I could not get the upper bolt out that holds the shackle to the spring. The frame is in the way no matter how high or how drooped I made the rear end. While I was in there I did some rust removal and some lubrication.
What leafs are you running? I have extended RPG shackles coming this week for my icons and was hoping it would be a quick job [emoji51]


Sent from my iPhone using Tapatalk Pro
 

Oldfart

FRF Addict
Joined
Oct 21, 2017
Posts
5,748
Reaction score
13,897
Location
Saggy Balls Division of Trump Army
This thread has reached a all time high. Rubber bed mats, and cup holder discussion!!! Anybody doing any real mods these days?

I am!! I just mounted a couple of these awesome bud vases in my truck! I can send you the link if you want. I do want to warn you though, it doesn't come with the pretty flower.

beetle-vase.jpg
 

zombiekiller

OG BooBooRunner
Joined
Sep 24, 2017
Posts
2,793
Reaction score
3,831
Location
New Orleans
Hell I think we would all just be happy to see some updated pics of your rig!


Sent from my iPhone using Tapatalk

Right now it is sitting in my garage with no front bodywork and all of the accessory wiring cut and hanging.

I'm in the midst of rewiring the entire truck.

Once I'm done with the rewire (converting to all Switchpros), Then I'll fit the new front glass that I've been staring at for 4 months, do a little fiberglass work on the bedsides, and replace the passenger doors.

After that it needs a new headgasket.

Then it will get wrapped.

Then i'll drag it out to cali to have the cage and tin work done.

The rest of the stuff that I need to do is maintenance and/or fixing broken stuff. ( like the lower steering shaft, removing, sanding and repainting different parts, replacing hardware, etc etc. I need to get the truck back to the shop to have the guys change a few things too).

I've been hammering on the truck for a couple of years now and its time to tear her down a bit and make her pretty again.

Probably won't see any prolific pics as shell be in pieces for a couple of months.
 
Top