HELP ENGINE NOISE

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

FordTechOne

FRF Addict
Joined
Jul 29, 2019
Posts
6,398
Reaction score
12,499
Location
Detroit
Any update, I think I may have the same sound. I describe it as a chatter or valves clicking sound. But I'm no mechanic.

Try putting it in 4WD Auto and see you f the noise goes away. If it does, there is an issue with your IWE system causing the hubs to stay partially engaged
 

jrc1122

Member
Joined
Jan 1, 2013
Posts
10
Reaction score
1
Location
North Carolina
Try putting it in 4WD Auto and see you f the noise goes away. If it does, there is an issue with your IWE system causing the hubs to stay partially engaged

Will do, it currently is in the shop for Cam Sensor codes (Check engine light). I described the sound it made to the service rep when I dropped it off. They may figure it out, they may not.

The Cam phasers were evidently just done by the dealership right before I bought it, so they are going to have open up the timing cover and take a look to see if they borked something up.

That noise I had was only a one time occurrence (thus far). So time will tell. Thanks.
 

chefsam

FRF Supporting Member
Supporting Member
Joined
Aug 8, 2018
Posts
119
Reaction score
56
I recently had the same rattle noise with my 2018 right around 3,000 rpms then it would go away. This is what they diagnosed, I
picked it up a couple days ago and the noise is gone, so far so good...

I'm at 22,000 miles btw Indiana pretty close to your miles



02d39c12972313c6f5632dc6f537995d.png


Sent from my iPhone using Tapatalk
 
Last edited:
Top