TurboSmart EM BOV

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Stratia69

Full Access Member
Joined
Jan 2, 2018
Posts
114
Reaction score
33
Location
Belton, TX
They're sending me a new solenoid. Just got an rmail about an hour ago. Hebsaid that code is usually attributed to a disconnected solenoid. Possibly a wire may have been pulled out from the solenoid causing this.

Sent from my SM-G975U using Tapatalk
 

Lwlandy

Active Member
Joined
Sep 6, 2017
Posts
65
Reaction score
24
I wondered whether or not the TS EM BOV would fit the the SVC FMIC. Could you possibly take a pic through the grill when you get a chance? Thank you!

Sure,

There you go!

I painted my Intercooler front face to make it disappear but you can see where the BOV sits. As per my original comments on install it goes in fine, but better done before mounting the IC as the BOV needs to be rotated in the bayonet fitting which you cant do with the IC mounted. HTH.

EM_BOV.jpg
 

Raptor911

FRF Addict
Joined
Aug 9, 2012
Posts
4,690
Reaction score
2,250
Location
Ashburn, VA
You are right. It looks much better when compared to the OEM BOV.

I want to confirm that the mounting screw lines up as it would with the OEM BOV?

Also, do you have an ACC? If yes, can you take a pic of the ACC behind the grill?

Thank you!

Sure,

There you go!

I painted my Intercooler front face to make it disappear but you can see where the BOV sits. As per my original comments on install it goes in fine, but better done before mounting the IC as the BOV needs to be rotated in the bayonet fitting which you cant do with the IC mounted. HTH.

View attachment 143998
 

Lwlandy

Active Member
Joined
Sep 6, 2017
Posts
65
Reaction score
24
You are right. It looks much better when compared to the OEM BOV.

I want to confirm that the mounting screw lines up as it would with the OEM BOV?

Also, do you have an ACC? If yes, can you take a pic of the ACC behind the grill?

Thank you!

I couldn't get the little Aluminum bracket supplied to line up with the mounting hole, maybe because of the orientation, or maybe as there were a couple of different holes on the OEM unit and only one on the IC. But it was a simple 5 minute exercise to create one that fitted. I run standard Front bumper, so did not have to relocate the ACC.
 
Top