What did you do to your Raptor today? (Gen2)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Gdog

Full Access Member
Joined
Nov 6, 2018
Posts
934
Reaction score
889
Location
Colorado
Waiting for the weekend to detail the truck. It was snowing today

View attachment 143427
You need to do the Adams paint prep prior to using spray ceramic
Its already got a coat of ceramic. I didnt have the booster when I did the coat originally. I clayed the truck prior to everything as well.
awesome. Ive got the ceramic boost to do next. Did the spray about 2 months ago.. Looks good
 

nikhsub1

FRF Addict
Joined
Mar 5, 2017
Posts
4,106
Reaction score
4,692
Location
Los Angeles
Finally got a proper case for all my work shit... Been rolling with nasty amazon cardboard boxes with cables and equipment. After much research I went with a Pelican case (so shit doesn't get wet etc). A bit pricey at $215 but well worth it for me - I had a lot of rusted HDMI cables etc from the boxes getting wet in the bed.

Went from this:

ZQiupHPr3omC2GxBFWzVxy4Q=w2406-h1804-no?authuser=0.jpg

To this:

16WV2Vz-2ijPsxxLvx-F2oaw=w2406-h1804-no?authuser=0.jpg

and fitted in the truck:

AK5oeDMhG5Ukilpo6zi1ZVZA=w2406-h1804-no?authuser=0.jpg

I got this size case because it fits under my Retrax canister.. only stick out an inch or 2.

nC19aEHFQCbTDI8bnifeEMng=w2406-h1804-no?authuser=0.jpg
 

FrenchRaptor

Full Access Member
Joined
Sep 8, 2016
Posts
146
Reaction score
66
Location
Waay Up North, Maine
Alright guys I’m gonna take this down a different track here for a bit. I bought a 2020 Screw in February and just installed my summer mud tires. These wheels are the Fuel OffRoad wheels I had on my 2012 Gen1. The wheels were bought in 2014 and I never had any issues with the TPMS sensors. Now installed on my new Gen2 I keep getting the “tire pressure monitor fault”. Brought it to my buddy who owns a reputable garage and he was unable to reprogram the sensors. We don’t understand what’s going on. These sensors all pretty much run on 315Mhz signal and should be recognized but we continue to have issues. Has anyone had issues with their TPMS sensors on the newer Raptor? Confused and thinking about just having them install 4 new ones and end the confusion! Tried the whole “brake..key on..key off thing” and that didn’t work either. Do these newer Raptors have something special to them that only a Ford dealership can deal with??
 

MnFlyer

Full Access Member
Joined
Mar 26, 2019
Posts
399
Reaction score
354
Location
MN
Alright guys I’m gonna take this down a different track here for a bit. I bought a 2020 Screw in February and just installed my summer mud tires. These wheels are the Fuel OffRoad wheels I had on my 2012 Gen1. The wheels were bought in 2014 and I never had any issues with the TPMS sensors. Now installed on my new Gen2 I keep getting the “tire pressure monitor fault”. Brought it to my buddy who owns a reputable garage and he was unable to reprogram the sensors. We don’t understand what’s going on. These sensors all pretty much run on 315Mhz signal and should be recognized but we continue to have issues. Has anyone had issues with their TPMS sensors on the newer Raptor? Confused and thinking about just having them install 4 new ones and end the confusion! Tried the whole “brake..key on..key off thing” and that didn’t work either. Do these newer Raptors have something special to them that only a Ford dealership can deal with??
You shouldn’t have to program them. As soon as the wheel spins the sensor “work”.

Here is the one I ordered for my spare. No programming just put the tire on and drive. The truck saw it right away.

Motorcraft TPMS35 Tpms Sensor Kit, 1 Pack https://www.amazon.com/dp/B01KHL1L72/?tag=fordraptorforum-20


Sent from my iPhone using Tapatalk
 

Froadin

Full Access Member
Joined
May 6, 2019
Posts
108
Reaction score
72
Location
San Diego
3BF53A75-0721-46DD-ADB9-F58011DEC012.jpeg F2364273-E7A7-4276-A66F-AB3F43463123.jpeg Added Baja Designs LP6’s and Alternative Off-road hood mounts. First time connecting to the upfitter switches. BD now has a specific wiring harness for upfitters. No more cutting up the wiring harness. Couldn’t be happier with the LP6’s. Tons of light, not much reflection on the hood or wind noise. 3BF53A75-0721-46DD-ADB9-F58011DEC012.jpeg

B6AAB5BA-3996-4861-B488-A2A28F057240.jpeg
 

nikhsub1

FRF Addict
Joined
Mar 5, 2017
Posts
4,106
Reaction score
4,692
Location
Los Angeles
The lights are cartoonish big. You should consider relocating your front plate. No airflow to the intercooler with it there.
 

SSWIM

Full Access Member
Joined
Jan 9, 2014
Posts
647
Reaction score
617
May be cartoonish big, but the location is great for the LP6.

Looks good.

Sam
 
Top