Raptor rear lift

I'd appreciate any help here.today I had a 2" level installed to my 2018 raptor screw and it turned out a little nose high and I'd like to keep a little rake.my question is what size rear block I should use?
Thanks.

Shane Hegarty said:

I'd appreciate any help here.today I had a 2" level installed to my 2018 raptor screw and it turned out a little nose high and I'd like to keep a little rake.my question is what size rear block I should use?
Thanks.

Click to expand...

Pretty sure there's already a block in the rear and I don't think you want to go higher. I think most would recommend you go to a different rear set of springs like Deavers or remove the 2" level up front and go down to 1.5" or whatever size to get the rake you want.

Sent from my SM-G960U using Tapatalk

I wouldn't even use blocks on a mall crawler...

+3 deavers will solve the problem

Booth9999 said:

+3 deavers will solve the problem

Click to expand...

Yup... +3 HD all day long!!!

Deaver +3s in SD or HD will do the trick. In both cases, you remove the factory 2” rear block so they only raise the truck by 1”. HDs are good if you tow or plan to carry gear around all the time.