Eibach Springs- drive Control Malfunction message

Installed new Eibach springs in my 2020 Raptor and now it is showing a Drive Control Malfunction service required message in my dashboard? Check all connectors and it looks good. My mechanic tried resetting the error message with his OBD scanner and no luck. Any advise?

The live valve shocks are not plugged in all the way. Check them again.

Connector is plugged all the way in. I took to the dealership today and they said the wire connected to the valve shocks is open. It might have been over stretched during installation.

Mauri said:

Connector is plugged all the way in. I took to the dealership today and they said the wire connected to the valve shocks is open. It might have been over stretched during installation.

Click to expand...

Thats why since I dont have tools to tackle install like this I took it to the dealer. I didnt trust any spring shop to take apart thise shocks.

Quick update: Issue fixed. The live shock wire that extends from right to left(when facing the truck) is stretched causing the lack of current driving the left shocks. Resolution is to unwrap extra wires to provide some slack and ensure connectivity. Tested voltage connectivity and 8-10v measured which is good enough for the live shocks to work. Kudos to Angkor Collision in San Jose for figuring this out.