What did you do to your Raptor today? (Gen2)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

rabidranger

Member
Joined
Oct 28, 2019
Posts
49
Reaction score
14
Location
Michigan
Washed
Removed front license plate holder - drill out rivets.
Installed Swarfworks front plate mount
Installed RockBlokz flaps - front only, need ratcheting screw driver for rears. I don't get why they used the hardware they do, i had to paint the screw heads black, not a big deal cuz I had the paint, and then they use phillips screws instead of like a hex head that i could use exising tools to install, but anyway fronts look great and were very easy to install.

Whats it look like with them drilled out? Been toying with doing that to mine too.
 

MacK88DO

Full Access Member
Joined
Dec 25, 2018
Posts
188
Reaction score
231
Location
Tyler, TX
My Swarfworks front plate mount arrived today and was promptly installed, its a real nice piece. After looking at how much the stock IC was blocked by the front plate Im glad I got one.
It will help but if you live in a hot climate consider an inter cooler upgrade too. I went a whole Texas summer with the stock intercooler and in 90 degree + heat the truck would just pull sooo much power once it heat soaked. I swapped to a COBB FMIC and it’s the one mod I wish I had done sooner! I can run it hard all day and never feel the truck pull power. If you’re trying to keep the stock look the Titan CVF IC bolts into the stock location but is a huge upgrade.


Sent from my iPhone using Tapatalk
 

CobraJay

Tweaker by trade
Joined
Jan 22, 2020
Posts
181
Reaction score
120
Location
NE Ohio
It will help but if you live in a hot climate consider an inter cooler upgrade too. I went a whole Texas summer with the stock intercooler and in 90 degree + heat the truck would just pull sooo much power once it heat soaked. I swapped to a COBB FMIC and it’s the one mod I wish I had done sooner! I can run it hard all day and never feel the truck pull power. If you’re trying to keep the stock look the Titan CVF IC bolts into the stock location but is a huge upgrade.


Sent from my iPhone using Tapatalk

I agree 100% but its 43 outside right now, I think im good lol. Use to battle heatsoak with my Cobra and my Turbo Forester all the time and its much better temp wise in the North.
 

NASSTY

FRF Addict
Joined
Aug 19, 2016
Posts
2,577
Reaction score
3,058
Location
ME
Whats it look like with them drilled out? Been toying with doing that to mine too.
I didn't have to drill the rivets.
When I ordered my 2017 and my 2020 I told the dealer not to install the license plate bracket when the truck arrived.
Then I got some 3/16" nylon hole plugs from Lowes, painted them and plugged the holes.

SAM_0598.JPG
 
Top