What did you do to your Raptor today? (Gen2)
- Thread starter Jepper
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I’ve run hard with it installed. Rock crawled, 60-70 mph on washboard roads with stock suspension. No issues at all so far. But that’s just my experience
Sent from my iPhone using Tapatalk
Thanks
Denvertaco07
Full Access Member
Installed Rigid 41610 kit.
Review:
1. The wiring harnesses suck for a Kit made specifically for a Ford Raptor. You have to cut and splice a bunch of stuff. Not a big deal, but should have been bespoke for "Raptor kit" IMO.
2. The two bundles of wires Ford gives you, 1 for the pass-through to passenger side foot well, one for the Aux switches, the manual says the bundle on the right (closer to drivers side) is for the foot well pass-through and the left (passenger side) is for the Aux switches...WRONG! Other way around, thanks!
3. I had all three sets working before buttoning up the engine bay, closed up everything then AUX 6 failed! WTH, check and redid all my splices, still nothing. Moved to AUX 3, works fine - so, Aux 6 (5 AMP) blew, I assume. Anyone know where that fuse is (never mind #62 so says the manual)? I had the 4 lamp floods on AUX 6, Rigid rates at 2.14 Amps, so I figured 5 should cover 2 @ 2.14 - Electricians please chime in.
4. They are bright, I like them.
Review:
1. The wiring harnesses suck for a Kit made specifically for a Ford Raptor. You have to cut and splice a bunch of stuff. Not a big deal, but should have been bespoke for "Raptor kit" IMO.
2. The two bundles of wires Ford gives you, 1 for the pass-through to passenger side foot well, one for the Aux switches, the manual says the bundle on the right (closer to drivers side) is for the foot well pass-through and the left (passenger side) is for the Aux switches...WRONG! Other way around, thanks!
3. I had all three sets working before buttoning up the engine bay, closed up everything then AUX 6 failed! WTH, check and redid all my splices, still nothing. Moved to AUX 3, works fine - so, Aux 6 (5 AMP) blew, I assume. Anyone know where that fuse is (never mind #62 so says the manual)? I had the 4 lamp floods on AUX 6, Rigid rates at 2.14 Amps, so I figured 5 should cover 2 @ 2.14 - Electricians please chime in.
4. They are bright, I like them.
Lags
Full Access Member
I had a slight rubbing after installing the 37’s took her for alignment and replaced my factory spare wheel with Icon.
Sent from my iPhone using Tapatalk
What rear bumper is that?
Lags
Full Access Member
It is gorgeous... No sensors anymore right?
Thanks! No I do run sensors and a tow hitch behind the number plate.
Sent from my iPhone using Tapatalk
Lags
Full Access Member
Oh wow... I inspected the picture with a closer eye and I see them. That's cool. I'm actually selling my Raptor right now, I need a Tow Pig/Overland Rig, but if it doesn't go within the next 30 days... More money thrown at the Rap. Hah! I have the SVC Mojave front, and the Mojave rear is pretty awesome... but this KHC rear you have is legit. Awesome Truck my friend!
Similar threads
