GEN 1 Fox 3.0 swap out

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Canuck714

FRF Addict
Joined
Jun 11, 2012
Posts
1,099
Reaction score
873
Location
San Antonio TX
With the Deaver +3 you really don't need the traction bar. Friend has that set up, and while it is supposed to be "bind free", you do feel a little bit of limitation in how the spring moves.
I run mine, with just the Deaver +3 without TB. I'm 625 HP, no issues with wheel hop.
 
OP
OP
Dalamar

Dalamar

Full Access Member
Joined
Oct 15, 2012
Posts
218
Reaction score
265
Location
SLC, UT
Thanks for that feedback Canuck.
your right on the spring, it's a +3, with removal of the stock 2" block, 1" raise...
Good stuff man. I'm hoping to pull the truck in to the shop in a week or two. will post up on the traction bars.

Stance :D

R277.jpg

R278.jpg
R178.jpg
 
Last edited:

sdraptor

Member
Joined
Jun 28, 2011
Posts
46
Reaction score
19
Good shit man. Do the 37's rub at all with stock fenders? I'm pulling the trigger on the 3.0s front and rear with new springs, frame enforcement and bumps. Probably jump up to 37's.
 
OP
OP
Dalamar

Dalamar

Full Access Member
Joined
Oct 15, 2012
Posts
218
Reaction score
265
Location
SLC, UT
Thanks SD :)

yes the front did rub on the pinch weld, this thread shows how I shaved them. after that with the fronts up all the way, no rub
I think proportionally it looks great. 37's are heavier, so your also adding some rotating mass.
 

John813

FRF Addict
Joined
Feb 2, 2015
Posts
1,024
Reaction score
711
Location
PSL/Jupiter
Dual Shock Compression? - Should be since they're from Fox.

Sorry got my wording wrong.

Are they the adjustable ones?

Think I'm set with who to buy from and which ones to get but just curious in the mean time while I debate among the 3 shock brands.
 
Top