What did you do to your Raptor today? (Gen2)

Dustan said:

where the leaf springs attach at the rear to the frame. I’ve used that area to lift the truck with a jack. You can use the frame rails if you have really tall jack stands. If lifted from the frame you will get full leaf spring drop. View attachment 140251

Click to expand...

Thanks Dustan

I'll keep that in mind

Finally had time to mess around with the upfitter wiring that’s been driving me nuts. Pinned the pass through wires and 6 ground wires. On the other side of the plug I pinned 6 quick disconnect connectors. Makes it a little easier and cleaner. Probably a million better ways to do it but this is what I can up with.
Also, the plug had a Christmas tree on it so I removed it and clipped into the fuse box cover. There is a empty retainer. Still have to finish wrapping up the wire.

Finally got around to installing my 3 ton Pro Eagle on a JDS mount




Sent from my iPhone using Tapatalk Pro

I looked at this jack but had some concerns over the wheels being strong enough.

BaseRaptor said:

I looked at this jack but had some concerns over the wheels being strong enough.

Click to expand...

LOL, suggest studying up, that is one of the absolute best jacks available.


.

BaseRaptor said:

I looked at this jack but had some concerns over the wheels being strong enough.

Click to expand...

*****!


Sent from my iPhone using Tapatalk Pro

Did a little spring cleaning. Got the water spots of the ceramic coating and sealed her up.

BaseRaptor said:

I looked at this jack but had some concerns over the wheels being strong enough.

Click to expand...

I have lifted my Raptor with it many times trust me they are strong enough


Sent from my iPhone using Tapatalk Pro

Mbdurham said:

Finally got around to installing my 3 ton Pro Eagle on a JDS mount




Sent from my iPhone using Tapatalk Pro

Click to expand...

Did you have to drill out new mounting holes in the pro eagle mount to work with the JDS mount? Waiting for my JDS mount to arrive to get my 3 ton pro eagle mounted.


Sent from my iPhone using Tapatalk

MacK88DO said:

Did you have to drill out new mounting holes in the pro eagle mount to work with the JDS mount? Waiting for my JDS mount to arrive to get my 3 ton pro eagle mounted.


Sent from my iPhone using Tapatalk

Click to expand...

Nope made sure I measured and ordered the correct one directly from JDS. I originally ordered one from Off Road Alliance and returned it because it didn’t line up.


Sent from my iPhone using Tapatalk Pro