Front License plate off to the side.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
Troutrad

Troutrad

Full Access Member
Joined
Jan 24, 2020
Posts
587
Reaction score
592
Location
Kalispell, MT
I’ve heard that it needs to be mounted on the passenger side due to the radar being on the drivers side
Does it interfere with the front collision radar?

I’ve heard that it needs to be mounted on the passenger side due to the radar being on the drivers side
 

The Beast

Member
Joined
Oct 20, 2019
Posts
3
Reaction score
0
Location
Maryland
8F12465F-64DD-4D33-9560-0D847CF3A20A.jpeg

My 2019 came with both holes to the side, and in the center. I preferred the look of the plate off to the side. I picked up a cheap plate mount at the auto parts store, and a rubber frame from Amazon. I think it looks pretty good.
 

NASSTY

FRF Addict
Joined
Aug 19, 2016
Posts
2,578
Reaction score
3,061
Location
ME
I don't have adaptive cruise control so I run mine on the driver side.

SAM_0665.JPG
 

Badgertits

FRF Addict
Joined
Jan 24, 2019
Posts
2,743
Reaction score
2,391
Location
Ma
Don’t go through soft cloth car washes only touch less. Period. This is my rule on all vehicles unless between the frigid temps & outrageous salt/sand thrown down on the roads my truck gets to the point where even $10 worth of high pressure soap @ the self serve bay doesn’t clean it off. Only took TWO times for a) my swarf works plate to get banged & shifted (easily fixable) & b) for the rappy graphics FORD American flag lettering to start getting “peeled” off by the spinning brushes.

all set

I know when I drop off my truck to get a wax @ local shop I use for oil change/tire rotations they put it through an auto soft cloth wash & being the OCD nut I am, I specifically remove the front plate & put blue painters tape on the edges of the stickers lol!!!
 
Top