What did you do to your Raptor today? (Gen2)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Mbdurham

Full Access Member
Joined
May 10, 2019
Posts
499
Reaction score
515
Location
Georgia
Swapped from ADD pro bolt on to ADD pro frame cut today. The swap took me about 5 hours which included removing and reinstalling the Cobb FMIC. Cutting the frame was easier than I anticipated but still nerve racking. Will post better pics tomorrow. Thank you Cole @ ADD!!

5bb45da637aec01fda62e06a7dc99603.jpg


Sent from my iPhone using Tapatalk Pro
 
Last edited:

Biggwrm

Full Access Member
Joined
Jan 17, 2019
Posts
244
Reaction score
141
Location
Morgan Hill Ca
Swapped from ADD pro bolt on to ADD pro frame cut today. The swap took me about 5 hours which included removing and reinstalling the Cobb FMIC. Cutting the frame was easier than I anticipated but still nerve racking. Will post better pics tomorrow. Thank you Cole @ ADD!!

5bb45da637aec01fda62e06a7dc99603.jpg


Sent from my iPhone using Tapatalk Pro
So clean. Love that bumper. Cant bring myself to do it, until I have to replace the bumper from damage.

looking forward to more pics
 

Mbdurham

Full Access Member
Joined
May 10, 2019
Posts
499
Reaction score
515
Location
Georgia
So clean. Love that bumper. Cant bring myself to do it, until I have to replace the bumper from damage.

looking forward to more pics
thanks and I understand. I was the same and initially bought the bolt on as I didnt want to cut the frame and keep everything reversible but after I swapped to the Cobb FMIC and ADD pro “bolt on” rear bumper I had cut so much of the truck I realized there was no going back without a lot of work anyway.


Sent from my iPhone using Tapatalk Pro
 

REMIX

Full Access Member
Joined
Dec 1, 2019
Posts
451
Reaction score
493
Location
Sarasota & Jacksonville, FL
Swapped from ADD pro bolt on to ADD pro frame cut today. The swap took me about 5 hours which included removing and reinstalling the Cobb FMIC. Cutting the frame was easier than I anticipated but still nerve racking. Will post better pics tomorrow. Thank you Cole @ ADD!!

5bb45da637aec01fda62e06a7dc99603.jpg


Sent from my iPhone using Tapatalk Pro

Very nice. Why did you swap this out and what are you doing with the bolt on?
 

Mbdurham

Full Access Member
Joined
May 10, 2019
Posts
499
Reaction score
515
Location
Georgia
Very nice. Why did you swap this out and what are you doing with the bolt on?
Thanks! I wanted the frame cut to begin with as I liked the approach angle and the look but didnt want to cut the frame to keep everything reversible but after I swapped to the Cobb FMIC and ADD pro “bolt on” rear bumper (you have to cut the OEM bumper off) I had cut so much of the truck I realized there was no going back without a lot of work anyway. The bolt on is for sale!


Sent from my iPhone using Tapatalk Pro
 

Gerald

Full Access Member
Joined
Sep 2, 2019
Posts
392
Reaction score
621
Location
Houston
Took the Raptor on a little camping trip to Brazos Bend State Park this past weekend. Always a fun park and they have some good trails to hike with a lot of wildlife. Usually these beasts are a little further away. But on this particular morning they decided to sun on the bank right next to the trail. A little unnerving to walk past these beasts, while they are looking right at you...........


Brazos Bend Alligators.jpg

And here is a shot of them that shows just how close to the trail they were. My wife kept asking me to back up, back up.......... You can imagine what my response to that was!!!

Brazos Bend Alligators 2.jpg
 

MnFlyer

Full Access Member
Joined
Mar 26, 2019
Posts
399
Reaction score
354
Location
MN
My knack for keeping the truck looking as new, lead me to remove the tires and paint the inner portion of the brake rotor as I noticed after only slightly over a month of ownership, it started rusting. I made a template out of cardboard and taped the bolts, then painted with POR15 Top Coat and applied ceramic coating. This should do the trick. Before and after pictures

View attachment 138184

View attachment 138185
Ha!

I haven’t gone that far...yet. I painted my spindles, half shaft and tie rods black with POR15.

Also did the skid plate and the grey on the bumper.


Sent from my iPhone using Tapatalk
 
Top