EVAP system CELs

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Donovan

FRF Addict
Joined
Aug 10, 2019
Posts
4,462
Reaction score
4,341
Location
DC
I think this might be the correct place to put this.

I removed my COBB tune. Then of course, started getting CELs. I get limp mode almost every-time I go up a hill and the CEL just stays on constantly. The codes associated with the EVAP below are 443 446 2418 and the others are all of my o2 sensors. I"m going to start looking today to see if anything is loose.

Thoughts?

P0161
P0443
P0446
P2418
P0135
P0141
P0155

My Mods:
CVF intercooler
Turbosmart BOV
Turbo adapters
SPD Down pipes
CORSA Extreme all the way back.
 
OP
OP
D

Donovan

FRF Addict
Joined
Aug 10, 2019
Posts
4,462
Reaction score
4,341
Location
DC
RESOLVED -

The company who installed my exhaust did not secure o2 sensor. o2 sensor chaffed on drive shaft, shorting wires in two places causing 25 amp FUSE to blow that controlled EVAP systems and cam/timing systems.

o2 sensor replaced and wiring harness repaired!
 
OP
OP
D

Donovan

FRF Addict
Joined
Aug 10, 2019
Posts
4,462
Reaction score
4,341
Location
DC
I like to ride without CELs lmao!

And I drive the balls off my vehicles. Except the R8 - it has ripped too much money from my pockets from the previous owners **** ups. So I baby it a bit more.
 
Top