Chasing that "frt end clunk"

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Chzhead

Full Access Member
Joined
Aug 25, 2019
Posts
186
Reaction score
147
Location
Wisconsin
OMG!!!! The sweet sound of silence. Finally got around to swapping out my UCA's this weekend and the noise if GONE!!! Been chasing this since August. Thanks guys!!!
 

Chzhead

Full Access Member
Joined
Aug 25, 2019
Posts
186
Reaction score
147
Location
Wisconsin
Correct. The driver side bolt (front-side) was tighter, was up against something (not sure if it's related to the brakes) so I had an open ended wrench on the outside and my socket/torque wrench on the inside to get that off/on.
 

The Car Stereo Company

aka grumpy car stereo guy
Supporting Member
Joined
Jul 8, 2012
Posts
31,595
Reaction score
21,461
Location
here, on frf
well this has bugged me long enough. i crawled under my truck and i can shake the sway bar and replicate the noise i hear, just on a lower sound level. looks like my bushings are shot since the bar moves about 3/8 of an inch. looks like im on the hunt for new sway bar bushings. i read somewhere someone tried the moog bushings but they didnt fit. wondering if i should just go back to the oem bushings. they have been on there for 7 years so its not like they didnt have a good life
 

Oldfart

FRF Addict
Joined
Oct 21, 2017
Posts
5,748
Reaction score
13,899
Location
Saggy Balls Division of Trump Army
well this has bugged me long enough. i crawled under my truck and i can shake the sway bar and replicate the noise i hear, just on a lower sound level. looks like my bushings are shot since the bar moves about 3/8 of an inch. looks like im on the hunt for new sway bar bushings. i read somewhere someone tried the moog bushings but they didnt fit. wondering if i should just go back to the oem bushings. they have been on there for 7 years so its not like they didnt have a good life

Especially with the way you said you get to use it, that sounds like great durability.
 

mchurch0211

Full Access Member
Joined
Feb 2, 2020
Posts
890
Reaction score
1,291
Location
area 51
well this has bugged me long enough. i crawled under my truck and i can shake the sway bar and replicate the noise i hear, just on a lower sound level. looks like my bushings are shot since the bar moves about 3/8 of an inch. looks like im on the hunt for new sway bar bushings. i read somewhere someone tried the moog bushings but they didnt fit. wondering if i should just go back to the oem bushings. they have been on there for 7 years so its not like they didnt have a good life
Moog do not fit just tried that had to go oem
 

Forum statistics

Threads
92,828
Posts
1,946,511
Members
56,082
Latest member
JTRaptor20
Top