GEN 2 Torque Arm v. Traction Bars

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

rayofsi

FRF Supporting Member
Supporting Member
Joined
May 6, 2019
Posts
398
Reaction score
168
Location
NYC
already have a torque arm. in a few months after all's done, i should be atleast 750rwhp. will definitely post more about this in the future.
 

Sunder

Active Member
Joined
Mar 16, 2018
Posts
59
Reaction score
16
Location
Wisconsin
already have a torque arm. in a few months after all's done, i should be atleast 750rwhp. will definitely post more about this in the future.

You have a Torque Arm for a Gen1?
Can you elaborate on “...after all’s done”?

What mods do you have on your rig? I was thinking to do Deavers or Icon springs in the rear.
 

rayofsi

FRF Supporting Member
Supporting Member
Joined
May 6, 2019
Posts
398
Reaction score
168
Location
NYC
You have a Torque Arm for a Gen1?
Can you elaborate on “...after all’s done”?

What mods do you have on your rig? I was thinking to do Deavers or Icon springs in the rear.
gen 2 , sorry, this is a gen 2 thread.
full engine build. 4.2L stroker, full race v band turbos. built trans, built torque converter. built many things.
 

Sunder

Active Member
Joined
Mar 16, 2018
Posts
59
Reaction score
16
Location
Wisconsin
gen 2 , sorry, this is a gen 2 thread.
full engine build. 4.2L stroker, full race v band turbos. built trans, built torque converter. built many things.
Oops. I didn’t catch this was a Gen2 thread. (They started talking about Gen1s! LOL)
 

Mikee Martin

SVC. Krazy House Customz. JDM. Seaside Superbikes
Supporting Member
Joined
Oct 15, 2019
Posts
243
Reaction score
193
Location
California
I can attest to the khc front slot delete kit. My front end (beside the Ford rack and pinion) is good for 15 feet all 4 tires...lol
 

Mikee Martin

SVC. Krazy House Customz. JDM. Seaside Superbikes
Supporting Member
Joined
Oct 15, 2019
Posts
243
Reaction score
193
Location
California
I believe the svc torque arms. Khc and rpg all bolt up. I can attest that the stock muffler and rear pipes will rip off the truck before the svc ones will. The svc don't break and seem to allow for 17" if you use the bed rack, longer brake lines and big fat fox 3.5 bypass shocks with +4 Deavers and +2 rpg shackles.
Shout out to Crazy House , I can't break my front a arm mounts anymore!!...Transmission is on #3 at 38,000 miles. Im done with stock internals time for shaved pistons, valve body upgrades , more tuning and building it in House! Sure glad my newest repair to that crappy steering rack is 100% bullet proof...
Good luck brother
 
Top