What did you do to your Raptor today? (Gen2)

First time in the snow. [emoji3063]

Played in the snow for 1st time as well!!

Got my bed and wheel wells sprayed .

Sent from my SM-N976V using Tapatalk

Kashoggio said:

Redid the upfitter harness for a cleaner look

Click to expand...

Please share how you did this, very clean and accessible

Got the BD sixpack foglights installed, dam I wish my truck fit in my garage. I froze my ass off lol.

Installed the SPD Performance Turbo Adapters.



Before and After:



Def seem to be able to tell a different in mid range has more tourqe

JustRaptor1 said:

Installed the SPD Performance Turbo Adapters.

View attachment 137404

Before and After:

View attachment 137405

Def seem to be able to tell a different in mid range has more tourqe

Click to expand...

Do you have a tune ?


Sent from my iPhone using Tapatalk

JustRaptor1 said:

Installed the SPD Performance Turbo Adapters.

View attachment 137404

Before and After:

View attachment 137405

Def seem to be able to tell a different in mid range has more tourqe

Click to expand...

How much of a pain in the ass was it? I hear it's a nightmare.

Todd Turbo S said:

Please share how you did this, very clean and accessible

Click to expand...

Start of by getting a deutsch dt 6 pin connector

can be found here
https://www.amazon.com/dp/B00D3S25CC/?tag=fordraptorforum-20

The crimping tool needed

[URL]https://www.amazon.com/gp/product/B01N3P2S17/?tag=fordraptorforum-20[/URL]


For wire sleeving I used
https://www.amazon.com/dp/B00D3S25CC/?tag=fordraptorforum-20
https://www.amazon.com/gp/product/B071JH14WZ/?tag=fordraptorforum-20

and use some regular shrink tubing for the ends to hold everything in place.

The nice thing is the truck side of the harness will never have to be changed once you build the connector... never have to trim it , re do it or all the other hack jobs I have seen out there.

The input side (male) side of the harness is “do as you wish” . Right now I have three inputs used for aux 1-3 for my front lights.

hope this helps a bit, there are some videos on YouTube on how to actually built the connector but it’s an easy process.

vazo said:

Looks great ... Where did you get that light and how did you tap into the reverse lights?

Sent from my SM-G960W using Tapatalk

Click to expand...

The company is called opt7 , there is a 48” or a 60 “ of the light . I used the 48” because if you have the tailgate step , there is a bracket in the way on the bed body that would interfere.
I tapped in to the trailer harness for the reverse power input and used a body ground. My goal was more reverse light and this is the answer for me. I bought the Baja lights and mounted them like everyone else but honestly I hated the look. It was too cluttered so I took them off.