hedonist222
Full Access Member
You can probably get some 3M adhesive remover to dissolve the adhesive on the graphic. Let the chemical do the work and slowly peel. Could be a ghost image of the graphic left over, but that remains to be seen. White is probably your best chance to not see anything once the graphic is removed.
^3M adhesive remover is amazing stuff! You may also need to use a heat gun as well and DA polish to blend the area. On a White Raptor you shouldn’t have any problems. (Remember start with the least aggressive combo and slowly work up as needed). Top it with a good ceramic coating or sealant and you’ll never know you had decals.
Thanks guys.
I'll keep the 3M in mind if needed.