Phoenix Android Radio 4th Gen PX6
- Thread starter Guy
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Gopherboy128
Full Access Member
No, it did not.
Under InstallSet, there was a setting along the lines of 'Use Interface 8836' (trying to remember) and it was set to "OFF" I had a fellow member send me his backup, and I noticed when used the Restore feature, with his backup, that changed to 'ON' and the Sync interface was back, however, the reason it was not displayed correctly, is that under InstallSet->Type->F150HI-> it was set to Sync2. Once I switched it to S3, everything was back to normal.
Under InstallSet, there was a setting along the lines of 'Use Interface 8836' (trying to remember) and it was set to "OFF" I had a fellow member send me his backup, and I noticed when used the Restore feature, with his backup, that changed to 'ON' and the Sync interface was back, however, the reason it was not displayed correctly, is that under InstallSet->Type->F150HI-> it was set to Sync2. Once I switched it to S3, everything was back to normal.
Added a column for PX6 Software version with link to download file. Also added link to download MCU file.
Gtibbot
Active Member
Thanks!
Gtibbot
Active Member
After reviewing the spreadsheet, I noticed these lines:
if changed to NO, the icons no longer show up on the upper tool bar?
Thanks
billj214
Member
Spent the day with support for this exact issue yesterday, the reverse camera did not activate, I was sent a few files on a flash then did, "Factory reset" and now it works fine. You may want to try doing a factory reset, might be enough to re-activate your camera. I will be installing my 360 camera this weekend. I have 2013 F150 Sync2 Auto, if you want the files i can send them over.
melvimbe
FRF Addict
That is correct. It helps clean up the toolbar, removing features you might no longer use. Combine that with the ability to assign icons like the radio to the specific you want to use, and the toolbar itself is a lot more functional. For me now, the phone icon is the only one I do not use, and that's just because my bluetooth isn't working.
melvimbe
FRF Addict
When you say you spent the day with support, do you mean over the phone? Were you able to apply to stay in relative contact with them during the troubleshooting process? I'm hesitant to contact them as I don't want to wait on hold only to be told to just try this file. I'd really like them to stay with me till the problem is solved.
Factory reset is probably something worth trying. I do have all my configurations in place, so they can be restored...with time. I should have time this weekend.
I got some files from them dated 12/25/19. Based on the posts above, it seems like there might be an even more updated version available to try.
To summarize again, my two issues are:
- Bluetooth is not working. The PX6 does not seem to find any BT devices nearby, and my phone cannot see the PX6. There is a configuration where you select which model BT to use, and I suspect I have that wrong. Perhaps the wrong driver is being used.
- Camera is not coming on (except during bootup) and is usually flickering. It is odd as the touchscreen locks when the camera should be on, as if it recognizes that camera should be shown, but it is not able to pull up the camera.
I upgraded my PX3 to the PX6 a few weeks ago and it's been awesome. Now that I have a good feel on it's performance, I decided to do the hidden Top and Bottom bar tweak. It's pretty easy and straight forward. I have gone an extra step and set two tasker tasks and linked them to shortcuts so I can quickly enable the full-screen mode and then disable it if needed. The full screen works on everything except for when split screen is used. The top and bottom bars will appear no matter the setting. Overall, I love the full screen over the top and bottom bars that come on the unit.
Best part is, nothing is hardcoded that would permanently alter the unit as its just a setting.. It does retain the setting after a reboot as well.
here is a quick video demo of what it does. I know some of you were concerned if it was permanent or not.
https://www.dropbox.com/s/zau2tsqitlvdku9/px6-barhide.mp4?dl=0
Best part is, nothing is hardcoded that would permanently alter the unit as its just a setting.. It does retain the setting after a reboot as well.
here is a quick video demo of what it does. I know some of you were concerned if it was permanent or not.
https://www.dropbox.com/s/zau2tsqitlvdku9/px6-barhide.mp4?dl=0
Members online
- Rddakota
- MDRAPTR
- VJDWashington
- phat_raptor
- LeadFooter
- GregTCU
- Neens
- elpechedepeche
- N8er
- AV67
- DFS
- Raptor_NV
- nikhsub1
- alockbox
- GreenGoblin
- furioussphinx
- TuxedoPlatinum
- HookEm
- tonyg969
- ScottS23
- aware
- shigman
- jdm_sixtwo
- Irregular F150
- BenBB
- BLADErunner
- tm965
- IIAWAH808
- jekyll537
- Domin0
- DaveRhoden
- ToadSmasher2K1
- Admin.RealTruck
- pirates1456
- schm1d
- Robertcrav
- Gator85
- rschap1
- alibo70
- DPGT
- goblues38
- Dev
- Coyote_695
- Nood1es
- Gus21
- The_Wolperting
- toxwaste
- Reptar854
- willywilson
- cuts
Forum statistics
Latest posts
-
-
What did u do to your raptor today?- Latest: Irregular F150
-
