Gen 1 Fox 3.0 shocks

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Status
Not open for further replies.

Chzhead

Full Access Member
Joined
Aug 25, 2019
Posts
186
Reaction score
147
Location
Wisconsin
Up for sale is my complete set of Fox 3.0 shocks (Front: 3.0 Internal Bypass, Rear: 3.0 External Bypass) for a gen 1 Raptor. Couldn't stand the ride so I went back to stock on all 4 corners.

I bought my 2013 Raptor with 33,000 miles on it in August and they were already on the truck. Not sure when they were installed so I'd say about 30k miles on them. I did have them serviced at the end of September and I still don't care for them. Also couldn't quite get the rears dialed in so the internal valves make some noise (if you know how to adjust them better, I am told the noise will disappear).

They do have some external corrosion on them but given the salty north, that's to be expected. Fronts are not adjustable, the rears are. Through my reseach these go for about $5500, they can be yours for $4200 + shipping. They do weight 111 lbs (FYI for shipping). Otherwise pick up is fine. I'm in SE Wisconsin

Ping me with any questions.

IMG_E5317.JPG IMG_E5318.JPG IMG_E5319.JPG IMG_E5320.JPG
 
OP
OP
Chzhead

Chzhead

Full Access Member
Joined
Aug 25, 2019
Posts
186
Reaction score
147
Location
Wisconsin
There is no adjuster on the front of the bypass canister. I was told they are not adjustable. Here is what the end of the canister looks like.....unless that's the adjuster?

IMG_5335.JPG
 
OP
OP
Chzhead

Chzhead

Full Access Member
Joined
Aug 25, 2019
Posts
186
Reaction score
147
Location
Wisconsin
No response from prospective buyer for 3 weeks.......still for sale.

$3500+ship
 
Status
Not open for further replies.
Top