maybe an alignment will change this
Gen 2 Slot Delete/Support kit Stage 1 and 2
- Thread starter khcdave
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
maybe an alignment will change this
OP
OP
Thanks for the feedback!!! Some lca brackets are less straight than others especially if the truck has been run offroad before the install of our kit. If you snug the main lca bolt and the 5/16 bolt first pulling the face of the support bracket to the lca bracket first then tighten the swaybar bolts it shouldnt pull the lca bracket back. If you look at the model this support bracket will move the lca bracket into its original factory position. There should be enough slot in those holes. either way when you align it check the caster numbers if they are good you are good to go
taco_drifter
Full Access Member
Will this work with a '19 F-150?
BBLV
Full Access Member
Alignment went well and they made a great point that it's rubbing even more now at full lock because the LCA's are locked in their outermost position. When I was installing the kit, my previous alignment had the LCA's damn near the insides of the slots on all pockets.
BBLV
Full Access Member
And FYI my rear pockets were already very slightly bent, which is the main reason I went with your kit in the first place. I'm a happy customer and highly recommend this, especially for the price.
I got my stage 1 kit installed no issues at all. With the lowers at the out most part of the slot I adjusted my icons uppers for the most amount of positive caster and kept camber and toe in perfect OEM spec. LOVE how it rides and steering feels great. The caster moved the tire forward and created a little more room for activities in the wheel well!
Similar threads
