GEN 2 S1 backup lights install part II - running wire to engine compartment inside the frame

Todd Turbo S · Dec 16, 2019

Great write up. Thank you.

Raptus · Dec 16, 2019

Thanks for taking the time to do that! I will be using it to wire my reverse lights for sure!

Sent from my iPhone using Tapatalk

metalwhiz · Dec 17, 2019

I just installed BD S2 reverse lights. 4X4 LEDs.com included upfitter harness for free. I had a fish tape, but used a piece of coax cable instead. Shoved it through the frame from the front, all the way to back. Then taped the two leads from the harness to coax and pulled back to front easily. Seems like it would be more of a hassle to run outside of frame.

Refugio · Dec 17, 2019

metalwhiz said:
I just installed BD S2 reverse lights. 4X4 LEDs.com included upfitter harness for free. I had a fish tape, but used a piece of coax cable instead. Shoved it through the frame from the front, all the way to back. Then taped the two leads from the harness to coax and pulled back to front easily. Seems like it would be more of a hassle to run outside of frame.

Yep
Nice a safe inside the frame

Big_Thick · Dec 18, 2019

Raptus said:
Thanks for taking the time to do that! I will be using it to wire my reverse lights for sure!

Same here.

Thanks @Palmetto_Raptor !!

northerner77 · Dec 19, 2019

Great write up. I will be installing these soon.

Palmetto_Raptor · Dec 21, 2019

and the final touches of putting 3/8" split wire loom over wire where is goes into frame

amREADY · Dec 30, 2019

This is perfect. Will also try the coax on the OffRoadAlliance S2's install... thanks.

GEN 2 S1 backup lights install part II - running wire to engine compartment inside the frame

Todd Turbo S

Full Access Member

Raptus

Full Access Member

metalwhiz

Active Member

Refugio

Full Access Member

Big_Thick

Member

northerner77

Active Member

Palmetto_Raptor

Full Access Member

amREADY

Full Access Member

Similar threads

Staff online

Members online

Forum statistics

Latest posts