What did you do to your Raptor today? (Gen2)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

91Eunos

Full Access Member
Joined
Oct 18, 2018
Posts
644
Reaction score
904
Location
Hill country, Tejas
My stock KO2s finally got to the point where I could justify replacing them, so went a bit of a different direction than I originally planned...

Was planning to put on some Nittos or Toyos, but mounted the new Goodyear Ultraterrains in 35/12.5-20 on the 601s I bought almost a year ago from Apollo Optics:

i-j6s4QNR-4K.jpg


looks a lot better than I expected! Looking forward to the road test...these rims/tires will spend 90% of their life on the road, and some very mild off roading at the ranch.

More pics later after I get them mounted.

will mount true snow tires on the stock rims after I get them powder coated. Leaning towards burnt bronze, but love plain black too

More pics of the wheels/tires:

i-zt9hkvT-X4.jpg

i-ngjH5x7-X4.jpg

i-x7NLVPw-X4.jpg

i-DPL8n4c-X5.jpg
 
Last edited:

TO 8217

Full Access Member
Joined
Oct 13, 2019
Posts
59
Reaction score
34
Location
Tulsa, OK
for the front i’d say 2 hours per side and the rears an hour each. That’s being generous with time and going slow. The rears are really simple though.


Sent from my iPhone using Tapatalk Pro
Wow thats quicker then i was thinking.
 

TO 8217

Full Access Member
Joined
Oct 13, 2019
Posts
59
Reaction score
34
Location
Tulsa, OK
My whole intention was not to use a 20 inch bar on the tube and the plan was removing the bar and placing it on the UTV, get 4 xl'80's mounted on top of the ADD tube by the KC brackets but a friend of mine convinced me with the lp6's which after installing I am convinced that my Xl80's has more quality of light and the spread its a better light r in my opinion.

So if you are planing on going with an lp series please try it before installing just to be on the safe side in terms of expectations.
and when you figure out what spal fans works on your truck please do update us.
Good to hear this, i was debating for my UTV which lights i was going with and decided last week to go with XL80’s pair on the front bumper!
 

TO 8217

Full Access Member
Joined
Oct 13, 2019
Posts
59
Reaction score
34
Location
Tulsa, OK
It already has full ADD front & rear suspension on it. Swapped out the factory leaf springs to Deaver +3HD’s, added Camburg Mig stock length shackles, swapped to 37” Toyo R/T’s, raised the front Fox 3.0 Factory Series coilovers to level out the front & back, & trimmed the front fenders to prevent any rubbing.

fb8e341b324e0e9b17cccf393a913cf7.jpg

f608ec51d1751c3575f77d24b7740819.jpg


The only other suspension mod I’m looking to do is the KHC torque arm.

Waiting on my beadlock beauty rings to get back from paint matching to leadfoot gray & my new appliqué tailgate that’d be replacing my current non-appliqué tailgate.

Next round of mods: SPD catted downpipes, SPD adapter, SPD 170 T-stat, AMS Boost Tubes, AFE Sage 2 CAI, Radium Dual Catch Cans, 1 Step Colder Plugs, & either an ORA or Goosetuned Tune (waiting to see how the COBB TCM tunes are).

After all that, the only other stuff on my to do list is: Phoenix Audio Console Screen, Dual JL TW3 10” Ported underseat sub setup, ADV front & bedside fenders, drop-in turbos, & the KHC torque arms. Everything else has pretty much been touched on the truck.

This is a sexy truck! What wheels are these? Photo’s are a little dark and i can’t see.
 
Top