Thank you sir!
ALL NEW! EXCLUSIVE Bumper Light Kits (No Drill) Released!
- Thread starter Specialtyperformanceparts
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Thank you sir!
OP
OP
- Joined
- Jul 15, 2017
- Posts
- 1,048
- Reaction score
- 950
keep in mind though, most any bumper you buy that you can install a light bar like that on, will block a similar amount of the camera. This just enables you to not need a new bumper.
Second, look at your front camera view without a light bar. If you notice, the bumper blocks about 1/4 of the view.
Now, another option that blocks nothing would be our Luminix Grille light bar kit. Here is a link-
https://specialtyperformanceparts.c...017-2019-40-led-light-bar-kit-for-2017-raptor
Another option is our upcoming addition to the bumper mount. It should be out sometime next week. It is a curved and slotted bar that allows you to mount up to 5 Baja Designs LP9 or LP6 round lights, up to 10 of Rigids POD or small Round Lights, Up to 5 of Rigids new Round 360 lights, or 10 of Bajas small pod lights, or a combination of small light bars, and pod lights... the possibilities are endless. With that mount, you can leave room in between for more camera view and of course custom looks..
see the Cad drawing below:
Wow! This can be very useful for my upcoming AL Priority laser jammer sensor install!
OP
OP
- Joined
- Jul 15, 2017
- Posts
- 1,048
- Reaction score
- 950
Its designed to fit a Factory bumper, so I doubt it will directly bolt to an aftermarket one without modification. The good news though is, unlike the ADD bumpers that are Steel and powder coated. Our brackets are fully Stainless steel and powder coated! So no rust!
is that a subtle jab lol
OP
OP
- Joined
- Jul 15, 2017
- Posts
- 1,048
- Reaction score
- 950
lol, it honestly wasn’t. You can make almost anything work together, but to work well... that’s a different story. Lol. But Rust is an issue with the big bumpers sometimes around the welds. Of course it’s understandable they aren’t stainless. It would probably be $10,000 for a bumper that size in stainless.
Raptus
Full Access Member
Is there still a possibility you may make a bracket to move the camera forward? Have you looked into this to see if it is even possible? Thanks!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
OP
OP
- Joined
- Jul 15, 2017
- Posts
- 1,048
- Reaction score
- 950
Yes. that is something we’re looking at in the future. However, it does take the simplicity out because you would need to remove the grill.
Hello! Do you have a date for that bracket to be released?
Similar threads
