alcoolaid's 2017 Raptor - Weekend Warrior

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
alcoolaid

alcoolaid

Active Member
Joined
Mar 4, 2019
Posts
85
Reaction score
93
Location
Vancouver, BC
Been raining a lot in Vancouver recently and had to travel for work so there wasn't a lot of updating to do but got some more stuff done!

S2 Pro - > Squadron Pro Driving Combo -> Squadron Pro Spot

1Wf3I4Y.jpg

Got my @BuiltRight side panels installed

z1qL10j.jpg

ibd50nw.jpg

Stuck on some of the @BuiltRight velcro panels. Will fill these up later.

xnPtWW8.jpg

The start of the dual battery wiring...

SgQdtm5.jpg

Got some 2 awg wire, 2 awg 3/8" lugs and 2 awg 1/4" lugs. Help to have the right tools!

Hwgy7QC.jpg

phu8fZF.jpg

UVkDC8X.jpg

This is where I chose to ground my second battery

20Latfh.jpg

The worst/hardest part of the job.. feeding wire through the damn firewall grommet

Ah5xW70.jpg

Just enough space for some 2 awg wire

mYExc7x.jpg

DwltipI.jpg

Some anderson connectors for quick removal of the battery setup when required

MKPAvG8.jpg
 
OP
OP
alcoolaid

alcoolaid

Active Member
Joined
Mar 4, 2019
Posts
85
Reaction score
93
Location
Vancouver, BC
Bracket for Blue Sea ML-ACR and 150A breaker. I just drilled 4 holes through the bracket and battery box and used 1/4" hardware to secure it. Solid enough for what its doing.

slod1h0.jpg

Everything bolted on

bUhkWbH.jpg

All wired up. Also pictured is @SDHQ Switch Pros SP-9100 mount.

vgtLwGb.jpg

Gonna test out this 30" rear chase light bar from amazon. $90! Tent blocks the 3rd brake light so I thought this would help visibility.

2tDutHO.jpg

Modifying the battery box

XU78HrB.jpg

Installed with ML-ACR remote switch

5ECd5rj.jpg

Slowly buttoning everything up over time. Won't finalize the wiring for the SP9100 outputs until I get my S1 reverse light kit and a-pillar mount lights in.

LsArq9h.jpg

Change in topic, made a mount for my waterport

3bGlvdJ.jpg

It flexed the side rails when full of water so I came up with a cheap solution that works better that I could have imagined lol

EwOrUMf.jpg

Feeling overland as f**k!

gbEVrKR.jpg

DHisEWk.jpg

11lb propane tank mounted with quick fist XL

RiuKyOx.jpg

Axe and poop shovel mounted. Waiting on 3" quick fists for fire extinguisher

4IJ0ZRz.jpg
 

Evan B

Member
Joined
Nov 3, 2019
Posts
9
Reaction score
0
Location
Salinas
+1 following. Great thread and great build! Just got a 2020 SCREW. Getting the Pace-Edwards full electric with rack options installed in a week. I’m glad I went with that looking at your build. Keep up the post!!
 
Top